Eşyalarını Tamir Et Topluluk Mağaza

Apple's October 2020 refresh of its iPad Air tablet, sporting an A14 Bionic processor, a 10.9" screen, a new design, and in-button TouchID.

36 Soru Tümünü görüntüle

Seçenekler

iPad screen wont turn on after power button replacement

Hello, i got this iPad from a friend. The iPad fell down and the power button got smashed in . It did power on when I put a cable in it but it went straight to recovery mode, I tried exiting recovery mode but it wasnt possible. After opening the iPad up I replaced thee power button but now the display will only light up for a few seconds and turn off again. I tried connecting it to my computer but the device is not recognized by iTunes neither 3uTools

Bu soruyu yanıtla Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Evet Hayır
Puan 0
Yorum Ekle

1 Cevap

Filtre ölçütü:
En Faydalı En Yeni En eski

Seçenekler

hello there,

It seems that the fault is deeper than originally thought (which is rather normal for iPads, they are difficult devices to repair, especially in untrained hands). Remove the home button (disconnect it) and try to start the tablet again. The recovery mode clearly indicates that at least one of the devices on the motherboard has no contact or shorts its circuits to ground. The motherboard needs to be removed and inspected for all circumstances. However, the repair should not be expensive and rather short. Due to the broken Home button, you will probably lose Touch.ID functionality.

Bu yanıt yardımcı oldu mu?

Evet Hayır
Puan 0
Yorum Ekle

Yanıtını ekle

Apostolos Gkioni sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 0

Son 30 gün: 2

Her zaman: 75