Ana içeriğe geç

The UC4051A Makita Chain Saw is a 16-inch, 14.5 Amp, corded electric chainsaw. It has a chain speed of 2,900 feet per minute and a maximum cut diameter of 16 inches.

1 Soru Tümünü görüntüle

stopped running in use. now will not turn on

Once before this occurred. I disassembled and reassembled and it worked for a year. Just happened again. Suggestions?

Yanıtlandı! Cevabı görüntüle Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Puan 0
Yorum Ekle

1 Cevap

Filtre ölçütü:
Seçilen Çözüm

Well guys (and ladies too) I just disassembled the handle end. checked voltage at switch (OK) and disconnected all the wires. Some looked a little crimped in spots from my previous repair!

Anyhow, I disconnected all leads and re-routed the wiring; taking care to pass them through the appropriate slots. When I was all done it ran just fine. Put it back together and make two cuts through a 18 inch log and it never balked. I really, really like this electric chain saw!

Bu yanıt yardımcı oldu mu?

Puan 0
Yorum Ekle

Yanıtını ekle

Dennis Mitchell sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 1

Son 7 gün: 4

Son 30 gün: 28

Her zaman: 174