Ana içeriğe geç

Released October 2008 / 2.4, 2.53, 2.66, 2.8 or 2.93 GHz Core 2 Duo Processor

454 Soru Tümünü görüntüle

Difficulty in opening the screw to access the hard disk

Dear all,

I wanted to change the hard disk of my macbook unibody (late 2008). All I need to do is to unscew the phillips screw and remove the black bar so that i can access my hard disk. However, I have difficulty in turning the scew. I used the correct screwdriver I presume (phillips #00) but to no avail. I do not want to make things worse so if anyone have any advice to salvage my situation, i will be very grateful.



Yanıtlandı! View the answer Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Puan 0
Yorum Ekle

MacBook Pil Tamir Setleri

Başlangıç $69.99

Buy Now

MacBook Pil Tamir Setleri

Başlangıç $69.99

Buy Now

1 Cevap

Filtre ölçütü:
Seçilen Çözüm

Sometimes those screws are a little tight. For those screws I use a driver with a wider handle so I can get more torque on it. I find this set works a lot better for that than the thinner drivers: 26 Bit Driver Kit

Bu yanıt yardımcı oldu mu?

Puan 2
Yorum Ekle

Yanıtını ekle

Michael Lai sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 Gün: 0

Son 30 Gün: 0

Her zaman: 870