Eşyalarını Tamir Et Topluluk Mağaza

Apple's line of laptops for professional and power users. To date, the MacBook Pro line includes 13, 14, 15, 16, and 17-inch variants, with major revisions defined by Pre-unibody(Original), unibody, Retina display, Touch Bar, and SOC (system-on-a-chip) designs.

19999 Soru Tümünü görüntüle

Seçenekler

Bent pin on LED/Inverter Connector on Logicboard

In the process of replacing the LCD, I managed to incorrectly seat the LED/inverter power connector. I now have a pin that is bent so badly that it's shaped like a hook. By the looks of the pin, these pins must be pretty heavy duty -- but I'm afraid I'm going to snap it if I bend it back. I was thinking of using some micro pliers or something similar. Or possibly heating up the pin to make it more malleable. Does anyone have any recommendations?

Here's a picture of my situation:

http://dl.dropbox.com/u/5593919/bentpin....

Yanıtlandı! Cevabı görüntüle Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Evet Hayır
Puan 1
Yorum Ekle

2 Cevap

Filtre ölçütü:
En Faydalı En Yeni En eski
Seçilen Çözüm

Seçenekler

Cross your fingers!

Try to straighten the pin with a pair of small pliers. Heating it would not help here.

Bu yanıt yardımcı oldu mu?

Evet Hayır
Puan 2
Yorum Ekle

Seçenekler

I've fixed a few issues like this before (3 I think), micro pliers are the way to go. don't heat it up, you might damage something else.

Bu yanıt yardımcı oldu mu?

Evet Hayır
Puan 2
Yorum Ekle

Yanıtını ekle

branthax sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 0

Son 30 gün: 1

Her zaman: 951