The Kenmore Elite HE3 is a washing machine by Kenmore.

629 Soru Tümünü görüntüle

F02 error code washing

I have read recent blogs of the "fix" for the F02 error code, which was easy ready and Thank you so much! I found a my son's little sock, pen cap and change in the change trap. So, I thought GREAT, saved some $$ - that had to be problem. Put a load of laundry in and water is coming pouring out of the bottom of washer. Thoughts?.?. HELP Please!!

Yanıtlandı! View the answer Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Puan 0
Yorum Ekle

Pro Tech Toolkit içeren veya $100tüm siparişlerde ücretsiz kargo!

Mağazamıza Göz Atın

1 Cevap

Filtre ölçütü:
Seçilen Çözüm

pantherpride, it is possible that you have an improperly installed drain hose. Check your drain hose installation to make sure that it is properly installed. Check to see if your drain hose is stuck way down the standpipe. If the standpipe opening is taped of, it can cause water to be siphoned out of the washer during the cycle.If water is leaking out of the bottom of the washer, unplug the washer and remove the bottom front panel. Once the panel is removed, check the tub, door boot seal, the hose between the tub and the drain pump, the drain pump and the drain hose. If you need to , you can get the service manual from here and there are more images on F02 Error Code HE3 Elite Washer Hope this helps, good luck.

Bu yanıt yardımcı oldu mu?

Puan 2


Will do!! Thank you so much for the quick response!! Going to continue this mission after work tomorrow, def. will check back in on the results. I was confused as it was not leaking before I cleared out all the debre from hte trap and I didn't mess with any of the hoses. I will walk through your steps above and let you know. Thank you again! Much appreciated!!


Yorum Ekle

Yanıtını ekle

pantherpride sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 Gün: 2

Son 30 Gün: 15

Her zaman: 1,194