Ana içeriğe geç

Second generation of iPhone. Model A1241 / 8 or 16 GB capacity / black or white plastic back. Repair is more straightforward than the first iPhone. requires screwdrivers, prying, and suction tools.

1505 Soru Tümünü görüntüle
Soru Kapandı

Display not working after reassembly

I have just purchased a 3G back assembly and have just put it all together. As far as I can tell all connectors are in but there is no life in the screen. The phone will connect to iTunes ok and will back up and update but it will not power up. Any thoughts please.

Bu soruyu yanıtlayın Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Puan 0
Yorum Ekle

2 Cevap

Filtre ölçütü:

It may need a hard reset, just pless power and home buttons to power off then power on again, it happened to me when change lcds whit the iPhone powered on.

Bu yanıt yardımcı oldu mu?

Puan 0
Yorum Ekle

Hi, i've taken apart my iPhone 3g several times now (got wifi problems) and the first time I put it all back together my screen wasn't working as well. I re-opened it, and noticed that the very last screen connector (the one with the cornered shape) comes loose very easily. Check that connector again, and push it in until you feel or hear a click. Do not lift the screen up again, as it will then bounce up again. It worked for me. Also, before closing the whole iPhone again, turn it on first to see if it has worked, and if not keep trying.

Hope it works for you.

Bu yanıt yardımcı oldu mu?

Puan 0
Yorum Ekle
İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 Gün: 0

Son 30 Gün: 0

Her zaman: 1,100