Black lcd screen after screen replacement

it works i did a hard reboot i used reboot to put it in and out of recovery mode (read that would fix it somewhere else" the digitizer works because when i mirror my iPod screen through Xcode it shows me unlocking it and i can use the touch screen on the iPod its just a black LCD tough , when i plugged in the LCD it turned solid black and when i take it off it goes to that like grayish color, so the lcd is getting some sort of power/input

Yanıtlandı! View the answer Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Puan 0
Yorum Ekle
Spread Fixmas Cheer
Get $12 off your purchase of $50 or more with code FIXMAS12
Spread Fixmas Cheer
Get $12 off your purchase of $50 or more with code FIXMAS12

1 Cevap

Filtre ölçütü:
Seçilen Çözüm

Possibly just a DOA part. If the LCD ribbon is connected to the logic board and there is no debris messing up the connections or bent pins, then the LCD should be working.

Bu yanıt yardımcı oldu mu?

Puan 1
Yorum Ekle

Yanıtını ekle

Bryan sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 Gün: 0

Son 30 Gün: 0

Her zaman: 1,143