Ana içeriğe geç

How to connect keyboard cable in MBP?

MacBook Pro 15" Santa Rosa

Well, I had a little problem with my keyboard a few weeks ago (could not type 'A') so I opened my laptop up according to MacBook Pro 15" Core 2 Duo Models A1226 and A1260 Keyboard Replacement and cleaned the keyboard up (hoping it would solve that problem)... But then I could not figure how to "slide the keyboard ribbon back into the connector" so I'm left with a laptop without a working keyboard... I've tried stuffing it back in but it would only go in about 1mm, not enough to make the connection... any way to connect it back in?

Yanıtlandı! Cevabı görüntüle Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Puan -1
Yorum Ekle

3 Cevap

Filtre ölçütü:
Seçilen Çözüm

It's a cam - it lifts up (very gently from the insertion end) you insert the ribbon cable then push the cam back down.

If this Answer is helpful please remember to return and mark it Accepted.

Bu yanıt yardımcı oldu mu?

Puan 2

3 Yorum:

how do i lift it up?

tarafından

Get a magnifying glass, examine the connector. Lift up the black plastic flap holding the ribbon in place (vertical ) slide in the ribbon, press down the flap.

tarafından

oh.. so it is opened from the back? haha ok i'll try again...

tarafından

Yorum Ekle
En Yararlı Yanıt

See step #11 of the guide you used.

Bu yanıt yardımcı oldu mu?

Puan 3

1 Yorum:

the problem is that the guide does not show the outcome of flipping the flap up... anyone can post a photo of it? haha...

tarafından

Yorum Ekle

Use tweezers, they help in get a little more of cable and then push it into the slot deeper)

Bu yanıt yardımcı oldu mu?

Puan 0
Yorum Ekle

Yanıtını ekle

xkiller213 sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 0

Son 30 gün: 0

Her zaman: 2,366