Whirlpool LSQ8520JQ0 doesn't spin unless manually spun

Question

Whirlpool LSQ8520JQ0

Whirlpool traditional top loader washing machine with agitator.

1Soru Görüntüle

Belt @belt67805

İtibar: 16

1

Gönderildi: 10 Mar 2025

Seçenekler

Whirlpool LSQ8520JQ0 doesn't spin unless manually spun

Model: LSQ8520JQ0

Hi everyone, I've been having this issue on and off for a few months now where my clothes are completely soaked after their wash.

Today I put up a stick to hold the lid up to take a peek inside while it runs. The agitator works. It started to spin for a few seconds during the first spin cycle, but then it stopped. It didn't spin when the high spin cycle started unless I manually started to spin it with my hand. After it was done I decided to try manually putting it back to the high spin cycle and it spun on its own.

Then I ran my second load. It spun on its own during the first drain cycle and during the high spin cycle. Just like normal.

Anyone know why? Thanks!

Bu soruyu yanıtla Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Evet Hayır

Puan 0

Yorum Ekle

1 Cevap

Mark Bogner @markbogner İtibar: 1 · Answer 1 · 2025-03-12T07:04:14-07:00

Hi Belt, there's a good chance your washer's clutch is wearing out. The clutch helps the motor & transmission to spin the tub, allowing it to gradually build up speed as the spin cycle starts. Here's a video I found that shows how to replace a clutch: https://www.youtube.com/watch?v=7RS1l6t8.... If you'd like to verify the clutch is actually the problem before ordering a new one, follow the video instructions as far as removing the transmission, and look at the clutch parts. If there is a lot of black dust in the clutch it means the brake parts are wearing out and you'll need a new one. A quick internet search like "Whirlpool LSQ8520JQ0 washer parts" should give several options for finding a new clutch.