Ana içeriğe geç

2.26 or 2.4 GHz / White plastic unibody enclosure

645 Soru Tümünü görüntüle

MacBook wont turn on, will display green adapter light/orange charging

Well im hoping you guys can help me out a bit.

my macbook suddenly stopped turning on. It will show green when i put my magsafe in and it charges the battery (orange light) but thats it. No chime no screen response.

Now i have heard of this 'jumping' idea to turn the macbook on directly from the logic board, but i cant quite work out what exact componets i have to touch, does nybody have a picture showing which parts i need to touch on this model to get it to jump?

or are there some things i have missed? i have tried removing battery, unplugging HDD, taking out ram, smc reset etc

i really dont want it to be the logic board :/

Yanıtlandı! Cevabı görüntüle Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Puan 4
2 Yorum

Thats great! thankyou very much

tarafından

Did it turn on?

tarafından

Yorum Ekle

11 Cevap

Filtre ölçütü:
Seçilen Çözüm

You are in luck. First what you will have to do is remove the bottom cover of the MacBook. Then you will need to jump these two contacts (top picture, ignore bottom one)

Block Image

they can be found to the left of the red square on this picture and over the two smaller connectors.

Block Image

Hope this Helps

Bu yanıt yardımcı oldu mu?

Puan 1
Yorum Ekle

i tried but unfortunately it didn't work, pretty sure the logic board is dead. thanks for the help though!

Bu yanıt yardımcı oldu mu?

Puan 0

1 Yorum:

Keep in mind, you need to disconnect the keyboard/trackpad ribbon cable before jumping the machine. This model commonly has a sticky power button that will get stuck in the depressed position, and, again, if this is the situation with yours, it's not going to be jump-able until you disconnect the ribbon cable.

tarafından

Yorum Ekle

i did not know that, i shall have another go without the cable in!

thanks

Bu yanıt yardımcı oldu mu?

Puan 0
Yorum Ekle

Thanks for this. It worked my mac is running again.

One question tho? Can i insert the keyboard cable again once its running?

Bu yanıt yardımcı oldu mu?

Puan 0

1 Yorum:

I got mine running sort of after jumping the power with the ribbon cable disconnected but the display does not come on, no error beeps, no lights except the power adapter.

tarafından

Yorum Ekle

Can anyone tell me how to perform "jumping" on logic board??

Thanks in advance

Bu yanıt yardımcı oldu mu?

Puan 0
Yorum Ekle

I need help looking for the jumper for the model mb991LL/A. Can anyone help me out.

Bu yanıt yardımcı oldu mu?

Puan 0
Yorum Ekle

look at the picture, you need to short these 2 connections together, a small flat screwdriver would do it, just short out the connector, and that would act like the power button, i guess it tests whether its anything to do with a sticky on off button. my macbook has the same problem, i will try later today!

Bu yanıt yardımcı oldu mu?

Puan 0
Yorum Ekle

super, this worked totally for me!now do i have to replace the keyboard or can i try to clean it out somehow?

Bu yanıt yardımcı oldu mu?

Puan 0
Yorum Ekle

Hi there,

Sorry I'm not a computer wizard. The jump start process - so I have the battery connector off the board and how will I get into the process of jumping the power?

Bu yanıt yardımcı oldu mu?

Puan 0
Yorum Ekle

Thank you so much, it worked for me!!! :)

Bu yanıt yardımcı oldu mu?

Puan 0
Yorum Ekle

I have a macbook air it doesnt turn on and yet sometimes it will turn on last a minute or two and then kaput, pretty sure this is the logic board.

Bu yanıt yardımcı oldu mu?

Puan 0
Yorum Ekle

Yanıtını ekle

Nate sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 1

Son 7 gün: 10

Son 30 gün: 38

Her zaman: 99,323