Model A1311 / Mid 2010 / 3.06 & 3.2 GHz Core i3 or 3.6 GHz Core i5 Processor

292 Soru Tümünü görüntüle

iMac does not power up

Hello, i have a mid 2010 21.5 imac that refuses to power up. The #1 diag led is on but as soon as i press the power button the led turns off and does not come back on unless i unplug the imac from the wall. No other led light up at any point.

Do you think this is a bad PSU or logic board?

Yanıtlandı! View the answer Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Puan 0
Yorum Ekle
Spread Fixmas Cheer
Get $12 off your purchase of $50 or more with code FIXMAS12
Spread Fixmas Cheer
Get $12 off your purchase of $50 or more with code FIXMAS12

1 Cevap

Filtre ölçütü:
Seçilen Çözüm

Your LEDs indicate a failed power supply.

Bu yanıt yardımcı oldu mu?

Puan 4

Yorumlar:

Thanks, i ordered a new psu. I will let you know if this fixed the problem.

tarafından

Hello, i replaced the psu but the leds still act as before. I tried disconnecting all non essential components and that did not help. I am guessing this is a logic board error.

tarafından

Yorum Ekle

Yanıtını ekle

kalt sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 Gün: 0

Son 30 Gün: 0

Her zaman: 1,024