Ana içeriğe geç

Mid 2010 Model A1278 / 2.4 or 2.66 GHz Core 2 Duo processor

794 Soru Tümünü görüntüle
Soru Kapandı

Magsafe problem.. Battery is not charging.!

Few days ago my magsafe adapter was over heating and gave up. Because of that the magsafe has some burned pins as i can see. I had to connect magsafe and wiggle a bit so that i can charge. Sometimes it does but now light on the connector neither green or orange lights are glowing. When the Mac was charged it works well.

I am not sure whats the problem. I borrowed a magsafe adapter from friend and tried but its not working. I think its the magsafe port that gave up?? is it? any suggestions??

Thanks

Yanıtlandı! Cevabı görüntüle Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Puan 0
Yorum Ekle

1 Cevap

Filtre ölçütü:
Seçilen Çözüm

I'd rep-lace the burned DC-IN BOARD. HERE'S HOW TO DO IT: MacBook Pro 13" Unibody Mid 2010 DC-In Board Replacement

Here's the part: MacBook Pro Unibody 13" and 15" MagSafe DC-In Board

MacBook Pro Unibody 13" and 15" MagSafe DC-In Board Görseli

Ürün

MacBook Pro Unibody 13" and 15" MagSafe DC-In Board

$9.99

Bu yanıt yardımcı oldu mu?

Puan 3
Yorum Ekle
İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 0

Son 30 gün: 0

Her zaman: 4,844