Model A1136 / 30, 60, or 80 GB hard drive / black or white plastic front

853 Soru Tümünü görüntüle

replaced headphone jack and hold switch but now it won't turn on?

I ordered the ipod video headphone jack / hold switch and swapped it out following the instructions on this site but once I get everything reinstalled the ipod won't turn back on?? has anyone else had this happen? I reinserted all the wire strips multiple times but nothing seems to work. any advise would be helpful.

Yanıtlandı! View the answer Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Puan 0
Yorum Ekle
Spread Fixmas Cheer
Get $12 off your purchase of $50 or more with code FIXMAS12
Spread Fixmas Cheer
Get $12 off your purchase of $50 or more with code FIXMAS12

1 Cevap

Filtre ölçütü:
Seçilen Çözüm

mdibdc, triple check the battery cable, make sure it is all the way in,and make sure that the locking clasp is down. Be careful, the connector tends to break easily of the logic board. Make sure that it is still properly connected to the logic board. Charge your iPod on a wall charger and see what you get.

Bu yanıt yardımcı oldu mu?

Puan 1
Yorum Ekle

Yanıtını ekle

mdibdc sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 Gün: 0

Son 30 Gün: 0

Her zaman: 310