Düzenleniyor Heyer Aerotech

İngilizce

Sayfa Başlığı

Ekran Başlığı

Özet

The Heyer Aerotech (AGFS) type 1 is an anesthetic gas evacuation system used in health facilities when administering anesthesia. The primary function of this device is to prevent aesthetic gas from being leaked in to the air and inhaled by staff during operation.

Ek bilgi

[flag|biomed]

== Background and Identification ==

Heyer Medical AG, established in Germany in 1883, has been a leading manufacturer of high-quality medical devices for over 130 years. The company specializes in respiratory care.

The model depicted is the Anesthetic gas exhaust system AGFS Type 1 and is available in the following installation variants:

* AGFS concealed installation -Article Number: 745269
* AGFS Upper part for installation in concealed box, including transvector and front plate - Article Number: 7452690
* Concealed box for AGSS transvector Article Number: 1171600
* AGFS complete for surface installation - Article Number: 7452692
* AGFS complete for installation in ceiling supply unit - Article Number: 7452715
* AGFS complete for installation in supply unit model Zumtobel - Article Number: 7452720
* AGFS complete for installation in supply unit model Trilux Article Number: 7452725

During the administration of anaethesia in a semi-closed or semi-open system, excess anesthetic gas can escape through the relief valve of the circular system. The anesthetic gas evacuation system (AGFS) prevents the effect of inhalation of anesthetic gas by users and members of staff.

The AGFS mounts near the location of anesthetic gas management. The transvector attachment generates negative pressure. Operators set suction power separately at each exhaust box to a standard value of 45-50 minutes. An adaptation of this value is possible under the customer's individual requirement.

== Technical Specifications ==

Performance:

* Suction power: 45-80 minutes
* Air consumption: depending on setting of suction volume, up to maximum 80 minutes
* Suction volume: maximum 80 minutes

Connections:

* Compressed air: Cu-tube 8x1 mm
* Exhaust air: Cu-tube 15x1 mm

Operating pressure:

* 5 bar

Dimensions:

* Front plate: 160 x 160 mm
* Concealed box: 150 x 150 x 60mm

== ***Additional Information*** ==

[link|http://heyer-aerotech.de/?handle=heyer&switchlang=en|Heyer Aerotech Official Page]

[link|https://de.wikipedia.org/wiki/Heyer_Medical|Heyer Medical Wiki]

[link|https://pdf.medicalexpo.com/pdf/heyer-aerotech-68735.html|Heyer Aerotech Catalogs and Technical Brochures]

[link|https://www.dnb.com/business-directory/company-profiles.heyer_aerotech_gmbh.2b3a951189b2932c9559a6c580b80c83.html|Heyer Aerotech Company Profile]

Ekli Belgeler

3 Belge Belge Ekle

Heyer_-_Anaesthetic_gas_evacua.pdf

Heyer Aerotech Anaesthetic Gas.pdf

Heyer Aerotech Anaesthetic Gas Evacuation System Operating Instructions.pdf

Türkçe

Sayfa Başlığı

Ekran Başlığı

Özet

Ek bilgi

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.