Milwaukee Hammer Drill 5380-21

The Milwaukee Hammer Drill 5380-21 is a corded power tool designed for drilling tasks. It is equipped with a 9 amp motor and operates with 120V AC power. This tool is characterized by a 1/2 inch chuck size and comes with two distinct no load speeds, 0-1500 and 0-3500 revolutions per minute (RPM). It can deliver 0-24,000 to 0-56,000 blows per minute, depending on the mode of operation.

The product measures 14 inches in length and weighs 7.3 lbs. It has a variable speed trigger feature that enables control over drilling speed. It comes with two operational modes, rotary hammer and hammer-only. The drill is equipped with an all-metal gearcase, an anti-vibration system, a feature for reversing, and an integral clutch. The clutch aids in protecting the gears, especially if the bit jams, by limiting torque reactions. This hammer drill is suitable for various materials such as concrete, brick, and other masonry materials.

• Power source: 120V AC corded electric
• Motor power: 9 amps
• Chuck size: 1/2 inch
• No load speeds: 0-1500/0-3500 RPM
• Blows per minute: 0-24,000/0-56,000
• Length: 14 inches
• Weight: 7.3 lbs
• Speed control: Variable speed trigger
• Mode of operation: 2-mode operation (rotary hammer and hammer-only)
• Gearcase: All metal
• Vibration control: Anti-vibration system
• Direction control: Reversing
• Clutch: Integral clutch

The Milwaukee Hammer Drill 5380-21 comes with a warranty that spans 5 years. This warranty specifically covers the product against any defects that might arise from the materials used or workmanship. To claim the warranty, it is typically required to provide proof of purchase to verify that the product is still within the warranty period. It's advisable to contact Milwaukee Electric Tool Corporation's customer service for specific instructions about the claim process, as these procedures may vary.