Roku Indoor Camera 360 SE (CP1000X) Repair

• Resolution: 1080p (1920x1080)
• Field of View: 360 horizontal, 93 vertical (pan/tilt)
• WiFi: 2.4 GHz 802.11 b/g/n
• Bluetooth: BLE v4.2
• Power: 5V 2A via USB Micro-B
• Storage: MicroSD card slot
• Audio: Two-way (built-in mic and speaker)
• Night Vision: Color night vision with 850nm IR LEDs

• SoC: Ingenic T31
• SPI Flash: ZB25VQ128A (16 MB, ZBIT Semiconductor)
• WiFi/BLE Module: AltoBeam ATBM6031
• Image Sensor: GC2053 (Galaxycore, 1/2.9" 2MP CMOS)
• Pan Motor: 24BYJ48 variant 461C (Shenzhen Yinuo Motor)
• Tilt Motor: 24BYJ48 variant 461D (Shenzhen Yinuo Motor)
• Main Board: DF3-MCU-501-V2.3
• Camera Board: DF3V2-LEDP01 V1.0
• Sensor Board: DF3V2-SENSOR-V2.1

• Model: CP1000X
• FCC ID: 2AUIUWYZECP2A
• IC: 25466-WYZECP2A
• Based on: Wyze Cam Pan v2 (rebranded)

This device is a rebranded Wyze Cam Pan v2. The USB-A port present on the Wyze version has been removed on the Roku version. The UART debug header (GND, TX, RX, 5V) remains accessible on the main board.