Craftsman 320.10861 Owners Manual

CRAFTSMAN®

7 1/4-in. CIRCULAR SAW with Laser Trac $ ^{\circledR} $

Model No. 320.10861 CRAFTSMAN CRAFTSMAN 7 1/4- 24 Tooth

AUTION: Read, understand and follow

II Safety Rules and Operating Instructions

this manual before using this product.

SAFETY

ASSEMBLY

OPERATION

• MAINTENANCE

• ESPAÑOL

ears, Roebuck and Co., Hoffman Estates, IL 60179 U.S.A.

TABLE OF CONTENTS

Warranty.....Page 2
Safety Instructions.....Pages 3-11
Safety Symbols.....Page 11
Assembly.....Pages 12-13
Description.....Pages 13-14
Operation.....Pages 15-23
Maintenance.....Page 24
Accessories.....Page 25
Service Numbers.....Back cover

FULL ONE YEAR WARRANTY ON CRAFTSMAN CIRCULAR SAW

If this product fails due to a defect in material or workmanship within two years from the date of purchase, RETURN IT TO THE NEAREST SEARS STORE IN CANADA, and Sears will replace it, free of charge.

This warranty gives you specific legal rights, and you may also have other rights which vary from province to province.

Sears, Roebuck and Co., Dept. 817 WA, Hoffman Estates, IL 60179

SAVE THESE INSTRUCTIONS! READ ALL INSTRUCTIONS!

SAFETY INSTRUCTIONS

WARNING: BE SURE to read and understand all instructions. Failure to follow all instructions listed below may result in electric shock, fire and/or serious personal injury.

SAFETY PRECAUTIONS FOR LASER

This saw has a built-in laser light. The laser is a Class IIIA and emits output power of a maximum $ 2.5 \, mW $ and $ 400 \, nm $ - $ 700 \, nm $ wavelengths. These lasers do not normally present an optical hazard. However, DO NOT stare at the beam because it can cause flash blindness.

△

IMPORTANT: The following label is on your saw. It indicates where the laser light is emitted by the saw. ALWAYS BE AWARE of its location when using the saw and ALWAYS MAKE SURE that any bystanders in the vicinity of use are made aware of the dangers of looking directly into the laser.

AVOID EXPOSURE

LASER RADIATION EMITTED

FROM THIS APERTURE

WARNING: LASER LIGHT. LASER RADIATION Avoid Direct Eye Exposure. Do Not Stare into beam. Only turn laser beam on when tool is on the workpiece. Class IIa.

WARNING: DO NOT stare directly at the laser beam. A hazard may exist if you deliberately stare into the beam. ALWAYS follow the following safety precautions when using this saw.

1. The tinted glasses that were included will enhance the laser light in bright light conditions. DO NOT wear these glasses if they interfere with the safe operation of this saw.

2. NEVER aim the beam at any person or object other than the workpiece.

3. The laser beam can be harmful to the eyes. ALWAYS avoid direct eye exposure. DO NOT look directly into the laser beam output aperture during operation.

4. The laser on the saw is not a toy. ALWAYS keep out of the reach of children. The laser light emitted from this device SHOULD NEVER be directed towards any person, for any reason.

5. ALWAYS be sure the laser beam is aimed at a sturdy workpiece (such as wood or rough coated surfaces) that does not have a reflective surface

SAFETY INSTRUCTIONS cont.

SAFETY PRECAUTIONS FOR LASER cont.

6. DO NOT use on surfaces such as sheet steel that have a shiny, reflective surface. The shiny surface could reflect the beam back at the operator.

7. ALWAYS be aware that laser light reflected off of a mirror or any other reflective surfaces can also be dangerous.

↑ CAUTION: ALWAYS follow only the instructions contained in this manual when using this laser. Use of this feature in any manner other than what appears in this manual may result in a hazardous radiation exposure.

8. DO NOT attempt to modify the performance of this laser device in any way. This may result in a dangerous exposure to laser radiation.

9. For further information regarding lasers, refer to ANSI - Z136.1 The STANDARD FOR THE SAFE USE OF LASERS, available from the Laser Institute of America (407) 380-1553.

WORK AREA SAFETY

1. ALWAYS keep your work area clean and well lit. Cluttered benches and dark areas invite accidents.

2. DO NOT operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust. Power tools create sparks which may ignite the dust or fumes.

3. ALWAYS keep bystanders, children, and visitors away while operating a power tool. Distractions can cause you to lose control.

ELECTRICAL SAFETY

1. Double insulated tools are equipped with a polarized plug (one blade is wider than the other.) This plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician to install a polarized outlet. Do not change the plug in any way.

2. Double insulation $ \square $ eliminates the need for the three-wire grounded power cord and grounded power supply system. Applicable only to Class II (double insulated) tools.

3. Before plugging in the tool, BE SURE that the outlet voltage supplied is within the voltage marked on the tool's data plate. DO NOT use "AC only" rated tools with a DC power