ClickN KIDS Tablet User Guide

CLICK KIDS

Tablet

TABLET GUIDE

7" Capacitive Multi-Touch Tablet

CLICK KIDS

Tablet

Getting Started

Thank you for purchasing your new ClickN KIDS Tablet. This quick start guide will take you through the setup process in quick easy steps.

After opening the box make sure the package contents are available for you.

Package Contents:

• ClickN KIDS Tablet

• Instruction manual

• Tablet guide

• In- ear headphones

• AC charger.

• USB cable

• Matching gel case

• Looney Tunes Phonics sticker.

Before powering on your new ClickN KIDS Tablet please make sure it is charged. Your tablet will need to be charged for at least 6 hours before your first use.

Charging your tablet

Use the included wall charger.

• Make sure the charger is plugged into the wall.

• Insert the charging pin into the charging port. *Please see #7 below.

• A battery indicator red light on the bottom right of the tablet will confirm that your tablet is charging.

Note: The pictures shown in this guide are for reference only.

1. Front Camera

2. Charging Indicator light

3. Home

4. Reset

5. Microphone

6. Charging port

7. MINI USB interface

8. Micro SD card slot

9. Power on/off

CLICK KIDS

Tablet

1 0 CLICKKIDS Tablet 2 3 45 6 7 8 9 10

11

1. Front Camera

2. Charging Indicator light

3. Home

4. Reset

5. Microphone

6. 3.5mm port

7. Charging port

8. MINI USB interface

9. Micro SD card slot

10. Power on/off

Tablet Setup Process

Powering on your device:

• The power button is located on the bottom right. *Please refer to page 3.

Press and hold the power button for 5 seconds until you see the ClickN KIDS logo on screen.

Note: The pictures shown in this guide are for reference only.

CLICK KIDS Tablet

Setup

• After the device is powered on you will see the ClickN KIDS logo on screen.

• After a minute the logo will disappear and you will be taken to the ClickN KIDS Tablet setup process.

Tablet Setup Process

• Tablet setup "Welcome"

• The first process allows you to setup your language settings.

• After you have selected your language tap “Start”.

Wi-FI Setup

• Select Wi-Fi or you can tap on “Skip” to setup Wi-Fi at another time.

• If you would like Wi-Fi to be setup, select your network name from the list.

• Enter your password and tap on “Connect”

• The Wi-Fi connection will go through authentication. Note: you may need to wait a couple of minutes before authentication is successful.

• Once authentication is successful, you are now connected to Wi-Fi.

Got Google?

• If you have a Google account and you would like to use it on your ClickN KIDS Tablet tap on "Yes" or you can tap on "No" to setup your Google account at another time.

• After tapping on “Yes” to setup your Google account you will need to “Sign In”

• To sign into your Google account you will need to type in your Google email and password.

• Type in your email address.

Tap on the "Next" button.

• Type in your password

• Tap the "Right" arrow button.

• Tap “OK” on the “Terms of Service” and “Privacy Policy”

• Your ClickN KIDS Tablet is now connected to your Google account.