Asus_N61VN-Series-Chapter-02-v.pdf

Disassembly Procedure

Please follow the information provided in this section to perform the complete disassembly procedure of the notebook. Be sure to use proper tools described before.

SUS N61VN Series Notebook consists of various modules. This chapter describes the procedure for the complete notebook disassembly. In addition, in between procedures, the detailed disassembly procedure of individual modules will be provided for your service needs. A

The disassembly procedure consists of the following steps:

•  Battery Module
•  CPU Module
•  Memory Module
•  Wireless LAN Module
•  HDD Module
•  ODD Module
•  Keyboard Module
•  Top Case Module
•  LCD Module
•  Motherboard Module
•  Bottom Case Module

V1.0

B A T T E R Y

C P U

Battery Module

The illustration below shows how to remove the battery module.

Remove Battery Module

Hold the battery latch and take the battery away.

CPU Module

The illustrations below show how to remove the CPU module.

Remove the CPU Module

1. Remove 4 screws here and take the CPU door away.

V1.0

2. Disconnect the fan cable and remove 2 screws here, then take the fan away.
3. Remove 8 screws here and take the CPU thermal module away.

V1.0

4. Turn the non-removable screw here 180 degrees counter-clockwise to loosen the CPU.
5. Squeeze the vacuum handling pump on the CPU and use it to lift the CPU away.

BACK

V1.0

M E M O R Y

Memory Module

The illustration shows how to remove the Memory Module.

Remove Memory Module

Pull two latches here to pop the Memory module up at 45  angles, and then pull out the module at that angle.

BACK

V1.0

W L A N

Wireless LAN Module

The illustration below shows how to remove the Wireless LAN Module from the notebook.

Remove Wireless LAN Module

1. Disconnect the Wireless Land antennas.
2. Remove 2 screws on Wireless LAN card and pull out the card from its slot.

BACK

V1.0

HDD Module

The illustrations below show how to remove the HDD Module from the notebook.

Remove HDD Module

1. Remove 2 screws here and take the HDD door away.
2. Remove 3screws here. Lift up the HDD module and take it away.

V1.0

2. Remove 4 screws to separate HDD from HDD housing

BACK

V1.0

O D D

ODD Module

The illustrations below show how to remove the ODD Module.

Remove ODD Module

1. Remove 1 screw here.
2. Pull out the ODD module slowly with a screwdriver push on back.

BACK

V1.0

K E Y B O A R

Keyboard Module

The illustrations below show how to remove the Keyboard and disassemble the Keyboard Cover.

Remove the Keyboard

1. Open 5 latches (Esc, F5, F9, Prt Sc,