Ana içeriğe geç

Giriş

Removing the brake caliper from the rotor is a necessary step for many repairs and modifications.

Aletler

Parçalar

Hiçbir parça belirtilmedi.

  1. Use a 15 mm box end wrench to remove the two bolts on the back of the brake caliper. Use a 15 mm box end wrench to remove the two bolts on the back of the brake caliper.
    • Use a 15 mm box end wrench to remove the two bolts on the back of the brake caliper.

  2. Lift the brake caliper off the rotor and set it aside. Place the caliper on some type of support so that you do not put too much strain on the brake hose.
    • Lift the brake caliper off the rotor and set it aside.

    • Place the caliper on some type of support so that you do not put too much strain on the brake hose.

Sonuç

To reassemble your device, follow these instructions in reverse order.

David Hodson

Üyelik tarihi: 13-04-2010

144.476 İtibar

127 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 0

Son 30 gün: 0

Her zaman: 305