Ana içeriğe geç

1999-2007 Chevrolet Silverado High Mount Brake/Tail Lamp Installation

Neye ihtiyacın var

  1. 1999-2007 Chevrolet Silverado High Mount Brake/Tail Lamp Installation, Truck High Mount Brake/Tail Lamp: adım 1, 3 resimden 1. 1999-2007 Chevrolet Silverado High Mount Brake/Tail Lamp Installation, Truck High Mount Brake/Tail Lamp: adım 1, 3 resimden 2. 1999-2007 Chevrolet Silverado High Mount Brake/Tail Lamp Installation, Truck High Mount Brake/Tail Lamp: adım 1, 3 resimden 3.
    • Take the Philips screwdriver and remove two Philips head screws on both sides of the high mount brake lamp.

    • Be sure to store the two Philips screws in a safe place so they don't get lost.

  2. 1999-2007 Chevrolet Silverado High Mount Brake/Tail Lamp Installation: adım 2, 2 resimden 1. 1999-2007 Chevrolet Silverado High Mount Brake/Tail Lamp Installation: adım 2, 2 resimden 2.
    • Pull out the truck high mount brake/tail light housing.

    • We recommend you pull out the housing with both hands so you don't break the water tight seal.

    • If in the event that you happen you break it, you may have some water leak issues so you would have to fix the high mount brake/tail lamp housing with some glue.

  3. 1999-2007 Chevrolet Silverado High Mount Brake/Tail Lamp Installation: adım 3, 3 resimden 1. 1999-2007 Chevrolet Silverado High Mount Brake/Tail Lamp Installation: adım 3, 3 resimden 2. 1999-2007 Chevrolet Silverado High Mount Brake/Tail Lamp Installation: adım 3, 3 resimden 3.
    • Remove the stock bulbs from its socket.

  4. 1999-2007 Chevrolet Silverado High Mount Brake/Tail Lamp Installation: adım 4, 1 resimden 1.
    • Replace with the LED bulb.

    • Test your new LED truck high mount brake lamps to make sure everything works.

    • If the LED lights don't light up, check the polarity by flipping the bulbs 180 degrees.

  5. 1999-2007 Chevrolet Silverado High Mount Brake/Tail Lamp Installation: adım 5, 3 resimden 1. 1999-2007 Chevrolet Silverado High Mount Brake/Tail Lamp Installation: adım 5, 3 resimden 2. 1999-2007 Chevrolet Silverado High Mount Brake/Tail Lamp Installation: adım 5, 3 resimden 3.
    • Put back the light housing and screw in the two Philips screws.

Sonuç

Test and enjoy your new LED truck high mount brake/tail replacement lights.

2 farklı kişi bu kılavuzu tamamladı.

Eric Wu

Üyelik tarihi: 01/21/15

3.357 İtibar

23 adet Kılavuz yazıldı

2 Yorum

The problem is there are no screws to remove.

richard - Yanıt

there are no screws to remove on my 3rd light I can’t change the bulb

richard - Yanıt

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 1

Son 30 gün: 27

Her zaman: 5,953