Use a #2 Phillips screwdriver to remove the four screws.
  • Use a #2 Phillips screwdriver to remove the four screws.

Yorum Ekle

Remove the rubber gasket from the rain tray.
  • Remove the rubber gasket from the rain tray.

Yorum Ekle

Lift the tray upwards and away from the vehicle.
  • Lift the tray upwards and away from the vehicle.

Yorum Ekle

Use a flathead screwdriver to remove the cap from the windshield wiper.
  • Use a flathead screwdriver to remove the cap from the windshield wiper.

Yorum Ekle

Mac RAM Kitleri
Mac'inizi hızlandırın. Hafızasını en yükseğe çıkar.
Mac RAM Kitleri
Mac'inize daha fazla bellek alın.
Use a socket wrench to release the passenger-side windshield wiper locking nut.
  • Use a socket wrench to release the passenger-side windshield wiper locking nut.

Yorum Ekle

Gently lift up the passenger-side windshield wiper. Gently lift up the passenger-side windshield wiper.
  • Gently lift up the passenger-side windshield wiper.

Yorum Ekle

Remove the driver-side windshield wiper in the same fashion.
  • Remove the driver-side windshield wiper in the same fashion.

Yorum Ekle

Lift up the plastic cover. Lift up the plastic cover.
  • Lift up the plastic cover.

Yorum Ekle

Use an offset Phillips screwdriver to remove a screw in the back of the automatic control unit cover. In a pinch, you can make this tool with a phillips driver bit and end wrench.
  • Use an offset Phillips screwdriver to remove a screw in the back of the automatic control unit cover.

  • In a pinch, you can make this tool with a phillips driver bit and end wrench.

Yorum Ekle

Use a #2 Phillips screwdriver to remove the front two screws.
  • Use a #2 Phillips screwdriver to remove the front two screws.

Yorum Ekle

Gently unplug and lift out the automatic transmission control unit. Gently unplug and lift out the automatic transmission control unit.
  • Gently unplug and lift out the automatic transmission control unit.

Yorum Ekle

Sonuç

To reassemble your device, follow these instructions in reverse order.

5 başka kişi bu kılavuzu tamamladı.

Matthew Newsom

Üyelik tarihi: 05-01-2010

31.408 İtibar

93 adet Kılavuz yazıldı

4 Yorum

Does the new TCU need to be programmed in any way?? Or is it just plug and play.

Paul Newlove - Yanıt

does it need to be programmed mine needs replacement my gears are not shifting

dean wafula - Yanıt

got a question if your display light is dim what could be the problem

dean wafula - Yanıt

Volkswagen tiguan won't start after disconnection, wat can I do to restart it

Jusu Suapay - Yanıt

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 22

Son 7 Gün: 109

Son 30 Gün: 426

Her zaman: 28,558