2003-2006 Chevrolet Silverado Headlight Bulb Replacement (2003, 2004, 2005, 2006)

Giriş

This is a guide on how to replace the low beam lights on a 2004 Chevrolet Silverado. The headlight is held in place by clips. You will not needs any tools to complete this project beside the replacement bulbs. Having a rag or terry cloth is best for handling the bulb.

Neye ihtiyacın var

Adım 1 Preparation

2003-2006 Chevrolet Silverado Headlight Bulb Replacement, Preparation: adım 1, 3 resimden 1.

2003-2006 Chevrolet Silverado Headlight Bulb Replacement, Preparation: adım 1, 3 resimden 2.

2003-2006 Chevrolet Silverado Headlight Bulb Replacement, Preparation: adım 1, 3 resimden 3.

Turn your vehicle off, and let the engine bay cool before starting the following steps.
First, open the driver side door, and reach under the steering wheel and release the latch to open up the hood of your truck.
Next, walk over to either of the headlights and remove the pin above the headlight to release the housing unit.
Make sure to put the pin in a safe location so you can lock in the housing once you finish replacing the light bulbs.

Düzenle

Adım 2 Removing the old lights

2003-2006 Chevrolet Silverado Headlight Bulb Replacement, Removing the old lights: adım 2, 3 resimden 1.

2003-2006 Chevrolet Silverado Headlight Bulb Replacement, Removing the old lights: adım 2, 3 resimden 2.

2003-2006 Chevrolet Silverado Headlight Bulb Replacement, Removing the old lights: adım 2, 3 resimden 3.

Pinch the blue clips and remove them from the back of the wiring harness.
After removing the pin, you should now be able to tilt the headlight downward to gain access to all of the wires.
Twist the light bulb counter clockwise and gently remove the harness and the light bulb.

Düzenle

Adım 3 Inserting the new lightbulb

2003-2006 Chevrolet Silverado Headlight Bulb Replacement, Inserting the new lightbulb: adım 3, 3 resimden 1.

2003-2006 Chevrolet Silverado Headlight Bulb Replacement, Inserting the new lightbulb: adım 3, 3 resimden 2.

2003-2006 Chevrolet Silverado Headlight Bulb Replacement, Inserting the new lightbulb: adım 3, 3 resimden 3.

Unbox your new low beam light, and insert it into the same hole you took the old one out of.
Be sure to twist the bulb clockwise until it locks into place with the harness pointing down.
Plug the blue wiring harness back in until you hear a click, and it should now be locked back into place.

Düzenle

Adım 4 Putting the headlight in

2003-2006 Chevrolet Silverado Headlight Bulb Replacement, Putting the headlight in: adım 4, 3 resimden 1.

2003-2006 Chevrolet Silverado Headlight Bulb Replacement, Putting the headlight in: adım 4, 3 resimden 2.

2003-2006 Chevrolet Silverado Headlight Bulb Replacement, Putting the headlight in: adım 4, 3 resimden 3.

Begin to replace the headlight housing back into its original place by tucking in the wires.
Grab the pin that you took out at the beginning and insert it back into the housing unit.
Align the housing back with the guide holes for the pin.

Düzenle

Adım 5 Repeat

2003-2006 Chevrolet Silverado Headlight Bulb Replacement, Repeat: adım 5, 2 resimden 1.

2003-2006 Chevrolet Silverado Headlight Bulb Replacement, Repeat: adım 5, 2 resimden 2.

Follow steps 1-4 for the other headlight to replace the low beam headlight.
Make sure to keep track of all of your parts and dispose of your old bulbs properly.

Düzenle