Ana içeriğe geç

Giriş

This replacement guide will teach you how to how to replace the battery, safely, in a few easy steps.

Aletler

Parçalar

  1. Find black tabs that lock Battery cover into place. The tabs should snap off easily. The tabs should snap off easily.
    • Find black tabs that lock Battery cover into place.

    • The tabs should snap off easily.

  2. Use the 10 mm wrench to disconnect the negative battery terminal, followed by the positive terminal. It is vital  to disconnect the negative terminal before interacting with the battery. Make sure not to bridge the two terminals with your wrench or other tools.
    • Use the 10 mm wrench to disconnect the negative battery terminal, followed by the positive terminal.

    • It is vital to disconnect the negative terminal before interacting with the battery. Make sure not to bridge the two terminals with your wrench or other tools.

    • Remove the terminals once nuts are completely loose.

  3. MacBook Pil Tamir Setleri

    Başlangıç $69.99

    Buy Now

    MacBook Pil Tamir Setleri

    Başlangıç $69.99

    Buy Now
  4. Remove Battery terminals.
    • Remove Battery terminals.

  5. Using the 10mm Wrench remove gold nuts that hold the retention bar in place.
    • Using the 10mm Wrench remove gold nuts that hold the retention bar in place.

  6. After removing the bar pull the dead battery out using the black straps.
    • After removing the bar pull the dead battery out using the black straps.

Sonuç

After replacing the device, follow these instructions in reverse order to secure a new battery in its place.

2 farklı kişi bu kılavuzu tamamladı.

Gerrit Mouw

Üyelik tarihi: 01-05-2015

253 İtibar

2 adet Kılavuz yazıldı

Takım

Cal Poly, Team 8-4, Regan Spring 2015 Cal Poly, Team 8-4, Regan Spring 2015 üyesi

CPSU-REGAN-S15S8G4

5 Üyeler

5 adet Kılavuz yazıldı

Bir Yorum

Thanks!...Ron

sgt.splem - Yanıt

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 4

Son 7 Gün: 29

Son 30 Gün: 127

Her zaman: 8,817