Giriş

Weatherproofing car window for a convertible Ford Mustang 2006. This project will assist in providing a solution for people who have noticed a lot of wind noise in their car or water leaking inside the car. This guide will ensure people will have a good condition weatherproofing car window that is ready for any rain or snow or even car wash.

Aletler

  1. Driver side weatherproofing car window.
    • Driver side weatherproofing car window.

  2. Locate the both ends of the weather stripping.
    • Locate the both ends of the weather stripping.

    • Pull down the weather stripping from the middle.

    • In each side of the weather stripping, you will find one plastic nail.

    • Take off these two plastic nails with your hand.

    • Remove the old weather stripping.

    • Clean any dust from where you took out the old weather stripping.

    • Bring the new weather stripping.

    • Starting from both sides, push the two plastic nails into the holes.

    • Push the weather stripping from the middle with your fingers.

    • Make sure it is aligned.

Sonuç

To reassemble your device, follow these instructions in reverse order.

Abdelaziz Alqisy

Üyelik tarihi: 25-09-2018

181 İtibar

1 Kılavuz yazıldı

0 Yorum

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 Gün: 0

Son 30 Gün: 1

Her zaman: 44