Eşyalarını Tamir Et Topluluk Mağaza

2006-2013 Toyota Corolla Ignition Coil Replacement

Giriş

This is a guide to remove an old ignition coil and install a new one. This is standard maintenance for this vehicle and can be preformed with just a socket wrench with a ten millimeter head.

Neye ihtiyacın var

  1. 2006-2013 Toyota Corolla Ignition Coil Replacement, Ignition Coil: adım 1, 3 resimden 1. 2006-2013 Toyota Corolla Ignition Coil Replacement, Ignition Coil: adım 1, 3 resimden 2. 2006-2013 Toyota Corolla Ignition Coil Replacement, Ignition Coil: adım 1, 3 resimden 3.

    • Pop the hood and remove the black plastic cover over the engine.

    • There is nothing to unscrew, or unlatch, and the cover should lift off. Once removed, the top of the engine will look like the third picture

    Düzenle

  2. 2006-2013 Toyota Corolla Ignition Coil Replacement: adım 2, 2 resimden 1. 2006-2013 Toyota Corolla Ignition Coil Replacement: adım 2, 2 resimden 2.

    • Unplug the ignition coil you wish to replace. The coils are numbered one though four, left to right.

    • Do not unscrew the bolt on the ignition coil before this step. It makes the electrical plug more difficult to remove

    Düzenle

  4. 2006-2013 Toyota Corolla Ignition Coil Replacement: adım 3, 1 resimden 1.

    • Unscrew the bolt of the coil that needs to be replaced.

    • Be sure to put the bolt in a place you will not lose it!

    Düzenle

  5. 2006-2013 Toyota Corolla Ignition Coil Replacement: adım 4, 2 resimden 1. 2006-2013 Toyota Corolla Ignition Coil Replacement: adım 4, 2 resimden 2.

    • Pull the coil straight up and out. It should come off of the spark plug with little resistance.

    Düzenle

  6. 2006-2013 Toyota Corolla Ignition Coil Replacement: adım 5, 2 resimden 1. 2006-2013 Toyota Corolla Ignition Coil Replacement: adım 5, 2 resimden 2.

    • Apply a pea-sized amount of grease to the new ignition coil. It should be all around the rubber tip around the bottom.

    • While not required, this step will make any future replacements much easier.

    Düzenle

  7. 2006-2013 Toyota Corolla Ignition Coil Replacement: adım 6, 1 resimden 1.

    • When inserting the new ignition coil, press down lightly to ensure it is completely in place.

    • Re-plugging in the ignition coil, and re-screw it in. This can be preformed in either order.

    • Repeat steps three through five as necessary for the other three ignition coils.

    Düzenle
Sonuç

To reassemble your device, follow these instructions in reverse order.

Yazar

1 tane daha katılımcı ile

Henderson Gillette

Üyelik tarihi: 09/23/23

133 İtibar

1 Kılavuz yazıldı

Rozetler: 3

Ekip

Austin Community College, Team 22-3, Watkins Fall 2023 Austin Community College, Team 22-3, Watkins Fall 2023 üyesi

AUSTINCC-WATKINS-F23S22G3

2 Üyeler

2 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 3

Son 7 gün: 75

Son 30 gün: 302

Her zaman: 929