Ana içeriğe geç

2009 Subaru Impreza WRX Rear Door Panel Replacement

Neye ihtiyacın var

  1. 2009 Subaru Impreza WRX Rear Door Panel Replacement, Rear Door Panel: adım 1, 1 resimden 1.
    • Pry off the plastic tab inside the rear door handle.

  2. 2009 Subaru Impreza WRX Rear Door Panel Replacement: adım 2, 1 resimden 1.
    • Use the Phillips screwdriver to unscrew the 8x3/4" Phillips screw inside the door handle.

  3. 2009 Subaru Impreza WRX Rear Door Panel Replacement: adım 3, 1 resimden 1.
    • Use a flathead screwdriver to pry up the plastic tab inside the rear door armrest.

  4. 2009 Subaru Impreza WRX Rear Door Panel Replacement: adım 4, 1 resimden 1.
    • Use the Phillips screwdriver to unscrew the 8x3/4" Phillips screw inside the armrest.

  5. 2009 Subaru Impreza WRX Rear Door Panel Replacement: adım 5, 2 resimden 1. 2009 Subaru Impreza WRX Rear Door Panel Replacement: adım 5, 2 resimden 2.
    • Use flathead to pry off the upper panel located at the top of the rear door panel.

  6. 2009 Subaru Impreza WRX Rear Door Panel Replacement: adım 6, 2 resimden 1. 2009 Subaru Impreza WRX Rear Door Panel Replacement: adım 6, 2 resimden 2.
    • Use the flathead screwdriver to pry off and remove the panel over the door handle.

  7. 2009 Subaru Impreza WRX Rear Door Panel Replacement: adım 7, 1 resimden 1.
    • Remove the bundle of wires from the panel by pressing the tabs on the sides of the large white plastic connector.

  8. 2009 Subaru Impreza WRX Rear Door Panel Replacement: adım 8, 1 resimden 1.
    • Use the Phillips screwdriver to unscrew the 8x3/4" screws behind the door handle panel that was just removed.

  9. 2009 Subaru Impreza WRX Rear Door Panel Replacement: adım 9, 1 resimden 1.
    • Use the flathead screwdriver to pry off the door panel, starting from the outside edge of the door.

  10. 2009 Subaru Impreza WRX Rear Door Panel Replacement: adım 10, 1 resimden 1.
    • Use your hands to pull off and remove the door panel from the frame.

  11. 2009 Subaru Impreza WRX Rear Door Panel Replacement: adım 11, 1 resimden 1.
    • Using your hands, remove the two remaining wires connecting the door panel to the frame.

    • The door panel is now completely removed from the frame.

Sonuç

To reassemble your device, follow these instructions in reverse order.

Joseph Coplon

Üyelik tarihi: 04/20/15

101 İtibar

1 Kılavuz yazıldı

Ekip

Cal Poly, Team 8-3, Regan Spring 2015 Cal Poly, Team 8-3, Regan Spring 2015 üyesi

CPSU-REGAN-S15S8G3

5 Üyeler

5 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 2

Son 30 gün: 11

Her zaman: 2,435