Giriş

Fuses are used in electronics to protect electrical components from being exposed to excess current from the power supply. The fuse melts during a surge and breaks the circuit to protect the valuable electrical component. The element associated with a blown fuse will be disabled until the fuse is replaced.

Turn off the vehicle before beginning the fuse changing process to avoid electrocution.
  • Turn off the vehicle before beginning the fuse changing process to avoid electrocution.

  • Pull on the lever by the driver's feet.

  • Move to the front of the vehicle.

  • There is a latch below the center of the hood, push it to the left.

  • Lift the hood and support it with the hood strut.

Yorum Ekle

Locate the fuse box on the driver’s side of the hood compartment.
  • Locate the fuse box on the driver’s side of the hood compartment.

  • Disengage the latch located on the side of the fuse box.

  • Swing the lid open.

Yorum Ekle

  • Referencing the manufacturer's exterior fuse box diagram, identify the fuse that needs replacement.

Yorum Ekle

  • Carefully remove the fuse that corresponds to the electrical failure in the vehicle.

  • Check for damage or discoloration in the fuse.

  • Replace the damaged fuse with the new fuse.

  • Close the fuse box.

Yorum Ekle

Sonuç

To reassemble, follow these instructions in reverse order.

Christopher Pell

Üyelik tarihi: 26-09-2012

173 İtibar

5 adet Kılavuz yazıldı

Takım

Cal Poly, Team 15-45, Forte Fall 2012 Cal Poly, Team 15-45, Forte Fall 2012 üyesi

CPSU-FORTE-F12S15G45

5 Üyeler

6 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 5

Son 7 Gün: 13

Son 30 Gün: 74

Her zaman: 4,723