Ana içeriğe geç

4Sight 9 Cover Replacement

Salt Önkoşul
Bu kılavuz yalnızca diğer kılavuzlar için bir ön koşul olarak kullanılmak üzere tasarlanmıştır. Tek başına eksiktir.

Neye ihtiyacın var

  1. 4Sight 9 Cover Replacement, Cover: adım 1, 2 resimden 1. 4Sight 9 Cover Replacement, Cover: adım 1, 2 resimden 2.
    • Place the tablet on its side so that the two screws are facing upward.

    • Remove two 1 mm screws from the left side of the tablet using a Phillips #00 screwdriver.

  2. 4Sight 9 Cover Replacement: adım 2, 1 resimden 1.
    • Pry the case away from the device slowly by sliding a plastic opening tool along the device.

    • Once loosened, use your hands to separate the case from the device.

  3. 4Sight 9 Cover Replacement: adım 3, 2 resimden 1. 4Sight 9 Cover Replacement: adım 3, 2 resimden 2.
    • Hold the positive and negative wires as close as possible to the speaker.

    • Use an opening tool and fingers to simultaneously lift the speaker from the cover.

Sonuç

To reassemble your device, follow these instructions in reverse order.

3 farklı kişi bu kılavuzu tamamladı.

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 0

Son 30 gün: 1

Her zaman: 706