Ana içeriğe geç

Giriş

This guide will show you in detail how to remove the AARP RealPad. In order to remove the back cover you will need to know how to use a screwdriver and a suction cup.

  1. Loosen the back cover using the suction cup. Pull up on the center of the back with the suction cup.
    • Loosen the back cover using the suction cup.

    • Pull up on the center of the back with the suction cup.

    • Pull up on all four corners of the back with the suction cup.

  2. Remove the back cover by gently placing the small opening tool  in the crevice created by loosening the back.
    • Remove the back cover by gently placing the small opening tool in the crevice created by loosening the back.

    • Slide the opening tool around the edges of the device.

    • Wedge it open using the opening tool.

    • Use the suction cup again if you're having trouble removing the back cover.

  3. iPhone Pil Tamir Setleri

    Only $29.99

    Buy Now

    iPhone Pil Tamir Setleri

    Only $29.99

    Buy Now
  4. The black tape is stuck to delicate wires; remove with caution. Peel off the silver tape.
    • The black tape is stuck to delicate wires; remove with caution.

    • Peel off the silver tape.

    • Gently pull off the black tape.

  5. Using the JIS #000 screwdriver, remove the two 2.5mm screws. Using the JIS #000 screwdriver, remove the two 2.5mm screws.
    • Using the JIS #000 screwdriver, remove the two 2.5mm screws.

  6. Lift off the black audio cover. Lift off the black audio cover.
    • Lift off the black audio cover.

Sonuç

To reassemble your device, follow these instructions in reverse order.

Bir başkası bu kılavuzu tamamladı.

Alana Escue

Üyelik tarihi: 18-09-2018

425 İtibar

3 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 Gün: 1

Son 30 Gün: 6

Her zaman: 142