ASUS ROG Strix GL503VD-DB71 M.2 SSD Replacement

Giriş

This guide goes over how to replace the M.2 SSD for the ASUS ROG Strix GL503VD-DB71 laptop using the quick access compartment found on the bottom of the laptop. Before starting, ensure that you have a compatible M.2 SSD for the laptop and the proper tools.

Neye ihtiyacın var

Adım 1 M.2 Solid State Drive

ASUS ROG Strix GL503VD-DB71 M.2 SSD Replacement, M.2 Solid State Drive: adım 1, 2 resimden 1.

ASUS ROG Strix GL503VD-DB71 M.2 SSD Replacement, M.2 Solid State Drive: adım 1, 2 resimden 2.

Completely turn off the laptop, lay it on a flat surface, and turn it over.

Düzenle

Adım 2

Using a plastic pry tool, pry off the rubber tab to reveal the screw underneath.

Düzenle

Adım 3

Using a Phillips #0 screwdriver, unscrew the one 2 mm screw that is holding down the compartment cover on the bottom of the laptop.

Düzenle

Adım 4

ASUS ROG Strix GL503VD-DB71 M.2 SSD Replacement: adım 4, 3 resimden 3.

With a plastic pry tool, carefully pry open the cover on the bottom of the laptop starting where the screw was located.
Once part of the cover is popped off, slide your pry tool around the edge of the entire cover until all the connectors unsnap.

Düzenle

Adım 5

Locate the M.2 SSD and with a Phillips #0 screwdriver unscrew the 2.5 mm screw holding it down.

Düzenle

Adım 6

With your hand, lift up the M.2 SSD and carefully pull it out of the connector slot making sure not to apply to much pressure.

Düzenle

Adım 7

Take your new M.2 SSD and slide it back into the connector slot face up until it is fully in.
Some connection pads on M.2 SSDs are very fragile and can be broken easily.

Düzenle

Adım 8

Take the 2.5 mm screw that was holding down the M.2 SSD and with a Phillips #0 screwdriver screw it back into the slot to hold down the new M.2 SSD.

Düzenle

Adım 9

Take the bottom panel and align it so the shape fits to the opening.
Slide the left side of the cover back into the slot first so that the two extrusions fit into their openings.

Düzenle