Eşyalarını Tamir Et Topluluk Mağaza

ASUS U57A-BBL4 Display Assembly Replacement

Giriş

If your screen is cracked or not working properly, this guide will show you how to replace the screen on the ASUS U57A-BBL4.

Neye ihtiyacın var

  1. ASUS U57A-BBL4 Display Assembly Replacement, Display Assembly: adım 1, 2 resimden 1. ASUS U57A-BBL4 Display Assembly Replacement, Display Assembly: adım 1, 2 resimden 2.

    • Carefully pry the two rubber covers at the bottom of the screen off with a metal sprudger.

    Düzenle

  2. ASUS U57A-BBL4 Display Assembly Replacement: adım 2, 1 resimden 1.

    • Remove the two 1.84 mm Phillips head screws at the bottom of the screen using PH00 screw driver.

    Düzenle

  4. ASUS U57A-BBL4 Display Assembly Replacement: adım 3, 1 resimden 1.

    • Starting from one of the corners, use your fingers to pry the bezel from the screen.

    • There is a popping sound when the bezel is loosened from the screen.

    Düzenle

  5. ASUS U57A-BBL4 Display Assembly Replacement: adım 4, 3 resimden 1. ASUS U57A-BBL4 Display Assembly Replacement: adım 4, 3 resimden 2. ASUS U57A-BBL4 Display Assembly Replacement: adım 4, 3 resimden 3.

    • Remove the top two 2 mm Phillips head screws.

    • Remove the four 2 mm Phillips head screws on the bottom.

    • Remove the eight 2 mm Phillips head screws on the sides of the screen. There are four on each side.

    • There are 14 screws in total: two on the top, four on the bottom, and four on each side. Use PH00 screw-driver for removing all 14 screws.

    Düzenle

  6. ASUS U57A-BBL4 Display Assembly Replacement: adım 5, 2 resimden 1. ASUS U57A-BBL4 Display Assembly Replacement: adım 5, 2 resimden 2.

    • Don't tear off the bottom of the screen or you might damage the connector cable.

    • Carefully lower the screen from the casing with your fingers, making sure to keep the bottom intact and lay it face down on the keyboard.

    Düzenle

  7. ASUS U57A-BBL4 Display Assembly Replacement: adım 6, 2 resimden 1. ASUS U57A-BBL4 Display Assembly Replacement: adım 6, 2 resimden 2.

    • Disconnect the connector cable at the bottom by loosening the adhesive tape and lifting up.

    • Gently slide the cable out of the ridges to free the screen from the casing.

    Düzenle
Sonuç

To reassemble your device, follow these instructions in reverse order.

Bir başkası bu kılavuzu tamamladı.

Yazar

2 tane daha katılımcı ile

Isabella Bernardi

Üyelik tarihi: 10/18/17

671 İtibar

6 adet Kılavuz yazıldı

Rozetler: 8

+5 tane daha rozet

Ekip

UMass Dartmouth, Team S2-G4, Julie Fall 2017 UMass Dartmouth, Team S2-G4, Julie Fall 2017 üyesi

UMASSD-JULIE-F17S2G4

3 Üyeler

6 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 1

Son 7 gün: 4

Son 30 gün: 10

Her zaman: 260