Ana içeriğe geç

Giriş

Hard drives are vital to a computer since it allows for information to be stored. If yours is not working properly, here is how it can be removed.

Parçalar

Hiçbir parça belirtilmedi.

  1. Place the laptop upside down so that the bottom panel is facing upwards.
    • Place the laptop upside down so that the bottom panel is facing upwards.

  2. Unscrew the following 10 screws
    • Unscrew the following 10 screws

    • Eight 5 mm Phillips head screws

    • Two 10 mm Phillips head screws

  3. Carefully peel the panel off of the bottom of the laptop.
    • Carefully peel the panel off of the bottom of the laptop.

  4. Remove the following 4 screws and piece of tape.
    • Remove the following 4 screws and piece of tape.

    • Three 3 mm Phillips head screws

    • One 5 mm Phillips head screws

  5. Carefully disconnect the hard drive from its port by sliding it to right.
    • Carefully disconnect the hard drive from its port by sliding it to right.

Sonuç

To reassemble your device, follow these instructions in reverse order.

Bir başkası bu kılavuzu tamamladı.

Keith Rachels

Üyelik tarihi: 04-03-2016

595 İtibar

5 adet Kılavuz yazıldı

Takım

UMass Dartmouth, Team 3-4, Bhusal Spring 2016 UMass Dartmouth, Team 3-4, Bhusal Spring 2016 üyesi

UMASSD-BHUSAL-S16S3G4

2 Üyeler

5 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 Gün: 0

Son 30 Gün: 3

Her zaman: 686