Ana içeriğe geç

Giriş

This guide's focus is on replacing the Wi-Fi card of a wireless desktop computer. Please follow the directions below to accomplish this result.

Parçalar

Hiçbir parça belirtilmedi.

  1. Place the laptop upside down so that the bottom panel is facing upwards.
    • Place the laptop upside down so that the bottom panel is facing upwards.

  2. Unscrew the following 10 screws
    • Unscrew the following 10 screws

    • Eight 5 mm Phillips head screws

    • Two 10 mm Phillips head screws

  3. Carefully peel the panel off of the bottom of the laptop.
    • Carefully peel the panel off of the bottom of the laptop.

  4. Remove the one 3 mm Phillips head screw holding the Wi-Fi card in place.
    • Remove the one 3 mm Phillips head screw holding the Wi-Fi card in place.

  5. Carefully slide the card out of its connection port by pulling it outward.
    • Carefully slide the card out of its connection port by pulling it outward.

  6. Remove the black and white antenna cable connector wires by carefully pulling upwards on them.
    • Remove the black and white antenna cable connector wires by carefully pulling upwards on them.

    • Note that the black wire connects to "Main" and the white wire connects to "Aux".

Sonuç

To reassemble your device, follow these instructions in reverse order.

Keith Rachels

Üyelik tarihi: 04-03-2016

595 İtibar

5 adet Kılavuz yazıldı

Takım

UMass Dartmouth, Team 3-4, Bhusal Spring 2016 UMass Dartmouth, Team 3-4, Bhusal Spring 2016 üyesi

UMASSD-BHUSAL-S16S3G4

2 Üyeler

5 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 Gün: 0

Son 30 Gün: 3

Her zaman: 351