Eşyalarını Tamir Et Topluluk Mağaza

ASUS ZenWatch Charging Cradle Circuit board Replacement

Giriş

Replacing the circuit in the charging cradle

Neye ihtiyacın var

  1. ASUS ZenWatch Charging Cradle Circuit board Replacement, Charging Cradle Circuit board: adım 1, 3 resimden 1. ASUS ZenWatch Charging Cradle Circuit board Replacement, Charging Cradle Circuit board: adım 1, 3 resimden 2. ASUS ZenWatch Charging Cradle Circuit board Replacement, Charging Cradle Circuit board: adım 1, 3 resimden 3.

    • Using a metal spudger gently pry the plastic outer case apart

    • Pry open a little bit on each side before trying to open fully

    Düzenle

  3. ASUS ZenWatch Charging Cradle Circuit board Replacement: adım 2, 3 resimden 1. ASUS ZenWatch Charging Cradle Circuit board Replacement: adım 2, 3 resimden 2. ASUS ZenWatch Charging Cradle Circuit board Replacement: adım 2, 3 resimden 3.

    • Use the PH0 sized Phillips screwdriver to remove the three screws (2mm) holding the board to the cradle.

    • Gently pry up with your hands to pull the board off.

    • Don't grab directly on the USB port as you may loosen or bust the connections.

    Düzenle
Sonuç

To reassemble your device, follow these instructions in reverse order.

Yazar

2 tane daha katılımcı ile

Wayne McClure

Üyelik tarihi: 02/10/16

961 İtibar

5 adet Kılavuz yazıldı

Rozetler: 14

+11 tane daha rozet

Ekip

USF Tampa, Team 1-3, Sullivan Spring 2016 USF Tampa, Team 1-3, Sullivan Spring 2016 üyesi

USFT-SULLIVAN-S16S1G3

4 Üyeler

7 adet Kılavuz yazıldı

Bir Yorum

If you had listed what components were on the board or at least taken a picture of the other side of the board, I might have given you some points.

Nate Fansler - Yanıt

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 3

Son 7 gün: 5

Son 30 gün: 8

Her zaman: 2,839