Eşyalarını Tamir Et

Onarma Hakkı

Mağaza

ATT CL2940 Speakerphone Replacement

Yazan: Charles Messmore (ve 4 başka katılımcı)
  • Yorumlar: 1
  • Favoriler: 1
  • Tamamlanma: 1

Zorluk

Orta

Adımlar

9

Gerekli Süre

5 dakika

Bölümler

2

İşaretler

2

Grammar Police

Gramer Polisi

İçinizdeki Türkçe öğretmenini ortaya çıkarın ve bu kılavuzun yazımının geliştirilmesine yardımcı olun!

Step Trimmer

Adım Kırpıcı

Bu kılavuzda gereksiz adımlar mevcut. Az ve öz olması için kırpın!

Giriş

The speakerphone is used to talk hands-free on the phone. When this feature is not working, you may consider replacing it.

Aletler

Bu aletleri satın al

Parçalar

Hiçbir parça belirtilmedi.

  1. Remove five 9.5 mm Phillips #1 screws from the back panel of the phone. Remove five 9.5 mm Phillips #1 screws from the back panel of the phone. Remove five 9.5 mm Phillips #1 screws from the back panel of the phone.

    • Remove five 9.5 mm Phillips #1 screws from the back panel of the phone.

    Düzenle

  2. Slide a metal spudger into the crack around the front panel of the phone. Be careful not to break the clips holding the back panel to the front panel. Be careful not to break the clips holding the back panel to the front panel.

    • Slide a metal spudger into the crack around the front panel of the phone.

    • Be careful not to break the clips holding the back panel to the front panel.

    Düzenle

  3. When setting the back panel down, be careful to not rip any of the wires off of the internal components.

    • When setting the back panel down, be careful to not rip any of the wires off of the internal components.

    Düzenle

  4. The Essential Toolkit

    The most helpful tools in our most compact kit.

    Hemen Alışveriş Yapın

    The Essential Toolkit

    The most helpful tools in our most compact kit.

    Hemen Alışveriş Yapın

  5. Remove Front Panel as shown. Remove Front Panel as shown.

    • Remove Front Panel as shown.

    Düzenle

  6. Locate Speakerphone and remove solder with soldering iron. Locate Speakerphone and remove solder with soldering iron. Locate Speakerphone and remove solder with soldering iron.

    • Locate Speakerphone and remove solder with soldering iron.

    Düzenle

  7. Use the soldering iron to reconnect the wires to the new speaker.

    • Use the soldering iron to reconnect the wires to the new speaker.

    Düzenle

  8. Place new speaker back in place.

    • Place new speaker back in place.

    • Make sure that all of the components are back in place.

    Düzenle

  9. Replace Back Panel as shown. Replace Back Panel as shown. Replace Back Panel as shown.

    • Replace Back Panel as shown.

    Düzenle

  10. Secure the Back Panel with the same screws using the iFixit Protech Screwdriver kit J1 or PH1 bit. Secure the Back Panel with the same screws using the iFixit Protech Screwdriver kit J1 or PH1 bit. Secure the Back Panel with the same screws using the iFixit Protech Screwdriver kit J1 or PH1 bit.

    • Secure the Back Panel with the same screws using the iFixit Protech Screwdriver kit J1 or PH1 bit.

    Düzenle
Bitiş Çizgisi

Bir başkası bu kılavuzu tamamladı.

Yazar

4 tane daha katılımcı ile

Charles Messmore

Üyelik tarihi: 15-02-2016

520 İtibar

5 adet Kılavuz yazıldı

Rozetler: 10

+7 tane daha rozet

Takım

IUPUI, Team 1-1, Harley Spring 2016 IUPUI, Team 1-1, Harley Spring 2016 üyesi

IUPUI-HARLEY-S16S1G1

4 Üyeler

7 adet Kılavuz yazıldı

Bir Yorum

Yorum Ekle

Why do all these repairs require NO PARTS to replace defective parts?

And, of course< there is no links to a place to purchase the needed parts...

rpoland - Yanıt

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 3

Son 30 gün: 6

Her zaman: 364