Eşyalarını Tamir Et Topluluk Mağaza

ATT Trimline 210M Back Cover Replacement

Giriş

You will need to open up the phone in order to be able to detach the back cover and replace it. This repair might be needed if there is no ring coming from the phone.

Neye ihtiyacın var

  1. ATT Trimline 210M Back Cover Replacement, ATT Trimline 210M Back Cover Disassembly: adım 1, 1 resimden 1.

    • Open up the phone with a metal spudger, sticking it in the bottom near the cord jack entry.

    • Be careful with the amount of force you use, or the plastic may crack.

    Düzenle

  2. ATT Trimline 210M Back Cover Replacement: adım 2, 1 resimden 1.

    • Pull up on the spudger while simultaneously pulling up the top shell of the phone.

    Düzenle

  4. ATT Trimline 210M Back Cover Replacement: adım 3, 1 resimden 1.

    • After unclipping the bottom half of the shell, pull upward from the position shown in the picture to detach the top half of the shell.

    • The cord connecting the speaker is short, and may detach if not done carefully.

    Düzenle

  5. ATT Trimline 210M Back Cover Replacement: adım 4, 1 resimden 1.

    • You will have the motherboard and speaker exposed to you.

    Düzenle

  6. ATT Trimline 210M Back Cover Replacement, Back Cover: adım 5, 1 resimden 1.

    • Detatch the black and red wire from the back cover.

    Düzenle
Sonuç

To reassemble your device, follow these instructions in reverse order.

2 farklı kişi bu kılavuzu tamamladı.

Yazar

2 tane daha katılımcı ile

Juan Carrillo

Üyelik tarihi: 02/10/16

406 İtibar

3 adet Kılavuz yazıldı

Rozetler: 8

+5 tane daha rozet

Ekip

USF Tampa, Team 4-2, Lacy Spring 2016 USF Tampa, Team 4-2, Lacy Spring 2016 üyesi

USFT-LACY-S16S4G2

4 Üyeler

12 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 2

Son 7 gün: 5

Son 30 gün: 12

Her zaman: 906