Giriş
Use this guide to replace the battery of your AYL SoundFit. If your device's battery won't hold a charge, replacing the battery may resolve the problem.
Neye ihtiyacın var
-
-
-
Remove the four hex screws on the top of the device using a 2.5 hex screwdriver.
FixBot'a Sor
-
-
-
Place a spudger between the black plastic cover and the green case.
-
Pry the black cover away from the main casing and remove the cover.
-
-
-
-
Place a spudger between the black housing, which contains the woofer, and the outer rubber casing.
-
Pry the housing away from the body to reveal the motherboard, speaker, and battery.
-
-
-
Remove the two Phillips #00 screws securing the battery casing.
-
Remove the battery case to reveal the battery.
-
-
-
Desolder the positive and negative battery contacts from the motherboard.
-
Remove the battery from the device.
-
-
To reassemble your device, follow these instructions in reverse order.
Ekip
IUPUI, Team 3-3, Harley Spring 2016 IUPUI, Team 3-3, Harley Spring 2016 üyesi
IUPUI-HARLEY-S16S3G3
4 Üyeler
10 adet Kılavuz yazıldı
