Eşyalarını Tamir Et Topluluk Mağaza

AYL SoundFit Speaker Replacement

Giriş

Use this guide to replace the speaker of the AYL SoundFit.

Neye ihtiyacın var

  1. AYL SoundFit Speaker Replacement, Motherboard: adım 1, 1 resimden 1.

    • Unscrew the four hex screws on the top of the device using a 2.5mm hex screwdriver.

    Düzenle

  2. AYL SoundFit Speaker Replacement: adım 2, 1 resimden 1.

    • Place a spudger between the black plastic cover and the green case.

    • Remove the black cover away from the main casing and remove the cover.

    Düzenle

  3. AYL SoundFit Speaker Replacement: adım 3, 1 resimden 1.

    • Place the spudger tool between the black housing, which contains the woofer, and the outer rubber casing.

    • Remove the housing away from the body to reveal the motherboard, speaker, and battery.

    Düzenle

  5. AYL SoundFit Speaker Replacement: adım 4, 2 resimden 1. AYL SoundFit Speaker Replacement: adım 4, 2 resimden 2.

    • Remove the two Phillips screws which hold its battery casing on the housing using a PH00 Phillips screwdriver.

    • Remove the battery case to reveal the battery.

    Düzenle

  6. AYL SoundFit Speaker Replacement: adım 5, 1 resimden 1.

    • Using a soldering iron, heat up and remove both the positive and negative battery contacts from the motherboard.

    Düzenle

  7. AYL SoundFit Speaker Replacement: adım 6, 3 resimden 1. AYL SoundFit Speaker Replacement: adım 6, 3 resimden 2. AYL SoundFit Speaker Replacement: adım 6, 3 resimden 3.

    • Remove all three Phillips screws which holds the motherboard to the base using a PH00 Phillips screwdriver.

    • The motherboard can now be wiggled free from the base.

    Düzenle

  8. AYL SoundFit Speaker Replacement, Speaker: adım 7, 1 resimden 1.

    • Using a soldering iron, heat up and remove the positive and negative wire contacts from the motherboard.

    Düzenle

  9. AYL SoundFit Speaker Replacement: adım 8, 1 resimden 1.

    • Remove four Phillips #1 screws to detach the speaker form the module.

    • Extract the speaker from the body of the AYL SoundFit.

    Düzenle
Sonuç

To reassemble your device, follow these instructions in reverse order.

Yazar

3 tane daha katılımcı ile

Sajal Kherde

Üyelik tarihi: 02/16/16

107 İtibar

1 Kılavuz yazıldı

Rozetler: 4

+1 tane daha rozet

Ekip

IUPUI, Team 3-3, Harley Spring 2016 IUPUI, Team 3-3, Harley Spring 2016 üyesi

IUPUI-HARLEY-S16S3G3

4 Üyeler

5 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 1

Son 7 gün: 1

Son 30 gün: 2

Her zaman: 630