Ana içeriğe geç

Bu kılavuzda güncel değişiklikler var. En son onaylanmamış sürüme geçin.

Acer AL1714 LCD Replacement

Neye ihtiyacın var

  1. Acer AL1714 LCD Replacement, LCD: adım 1, 2 resimden 1. Acer AL1714 LCD Replacement, LCD: adım 1, 2 resimden 2.
    • Turn the monitor facedown.

    • Unscrew the 5 screws holding the back cover on.

    • (This may require flipping the monitor over and shaking the screws loose once they're already unscrewed)

  2. Acer AL1714 LCD Replacement: adım 2, 3 resimden 1. Acer AL1714 LCD Replacement: adım 2, 3 resimden 2. Acer AL1714 LCD Replacement: adım 2, 3 resimden 3.
    • Take the edge tool or a metal ruler and insert it into the bezel.

    • Apply pressure and push down.

    • Do the same to the right side.

    • Once the side of the bezel facing you is decoupled, take the back cover and pry it loose.

    • (This will require some force, you will hear a loud popping/snapping noises)

  3. Acer AL1714 LCD Replacement: adım 3, 3 resimden 1. Acer AL1714 LCD Replacement: adım 3, 3 resimden 2. Acer AL1714 LCD Replacement: adım 3, 3 resimden 3.
    • Remove the Power Button Circuit Board Flat Flex Cable from the Power Supply board under the metal cover.

    • Pull the cord back and out of the way.

    • (It may be stuck down with adhesive)

  4. Acer AL1714 LCD Replacement: adım 4, 3 resimden 1. Acer AL1714 LCD Replacement: adım 4, 3 resimden 2. Acer AL1714 LCD Replacement: adım 4, 3 resimden 3.
    • Unscrew the cord anchors for the VGA port.

    • (Use needle nose pliers if they're too tight for removal by hand)

  5. Acer AL1714 LCD Replacement: adım 5, 2 resimden 1. Acer AL1714 LCD Replacement: adım 5, 2 resimden 2.
    • Turn the monitor around.

    • Unscrew the 1 screw holding the Flat Power Cable cover in place.

    • Lift up and remove the Flat Power Cable cover.

    • (Careful: it may be sharp)

  6. Acer AL1714 LCD Replacement: adım 6, 1 resimden 1.
    • Unscrew the 5 screws holding the metal cage on.

  7. Acer AL1714 LCD Replacement: adım 7, 2 resimden 1. Acer AL1714 LCD Replacement: adım 7, 2 resimden 2.
    • Turn the monitor around.

    • Lift up on the back of metal cage, slightly.

    • Pull the cage toward self.

    • (Must be careful to free cover of the VGA port and power supply input)

  8. Acer AL1714 LCD Replacement: adım 8, 3 resimden 1. Acer AL1714 LCD Replacement: adım 8, 3 resimden 2. Acer AL1714 LCD Replacement: adım 8, 3 resimden 3.
    • Lift up on the Flat Flex Cable holder tabs to release the cords.

    • Lift up on the Flat Flex Cables and bend them out of the working area.

  9. Acer AL1714 LCD Replacement: adım 9, 3 resimden 1. Acer AL1714 LCD Replacement: adım 9, 3 resimden 2. Acer AL1714 LCD Replacement: adım 9, 3 resimden 3.
    • Unplug the 4 backlight wires from their ports on the Power Supply board.

    • (Considering their size, the best way to unplug the backlight wires is by slowly jiggling and pulling the wires out of place)

  10. Acer AL1714 LCD Replacement: adım 10, 1 resimden 1.
    • Unscrew the 5 screws holding the Power Supply and Video Display boards.

  11. Acer AL1714 LCD Replacement: adım 11, 2 resimden 1. Acer AL1714 LCD Replacement: adım 11, 2 resimden 2.
    • Lift and remove the joined Power Supply and Video Display boards.

  12. Acer AL1714 LCD Replacement: adım 12, 3 resimden 1. Acer AL1714 LCD Replacement: adım 12, 3 resimden 2. Acer AL1714 LCD Replacement: adım 12, 3 resimden 3.
    • Carefully detach the Power Supply and Video Display boards at the connector joint.

    • (This step is not necessary to replace the LCD Module. This step is only a safety precaution so as not to bend or break the Power Supply connector joint)

  13. Acer AL1714 LCD Replacement: adım 13, 1 resimden 1.
    • Remove the Flat Flex Cable from the Power Button Circuit board.

  14. Acer AL1714 LCD Replacement: adım 14, 3 resimden 1. Acer AL1714 LCD Replacement: adım 14, 3 resimden 2. Acer AL1714 LCD Replacement: adım 14, 3 resimden 3.
    • Grasp, lift, and remove the LCD Module from the front panel.

  15. Acer AL1714 LCD Replacement: adım 15, 1 resimden 1.
    • The final product with the LCD Module removed.

Sonuç

To reassemble your device, follow these instructions in reverse order.

3 farklı kişi bu kılavuzu tamamladı.

Christopher Kelly

Üyelik tarihi: 09/25/14

590 İtibar

4 adet Kılavuz yazıldı

Ekip

USF Tampa, Team 1-3, Brown Fall 2014 USF Tampa, Team 1-3, Brown Fall 2014 üyesi

USFT-BROWN-F14S1G3

3 Üyeler

5 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 2

Son 7 gün: 3

Son 30 gün: 8

Her zaman: 1,885