Ana içeriğe geç

Eşyalarını Tamir Et

Onarma Hakkı

Mağaza

  1. Turn the monitor facedown. Unscrew the 5 screws holding the back cover on.
    • Turn the monitor facedown.

    • Unscrew the 5 screws holding the back cover on.

    • (This may require flipping the monitor and shaking the screws loose once they're already unscrewed)

  2. Take the edge tool or a metal ruler and insert it into the bezel. Apply pressure and push down. Do the same to the right side.
    • Take the edge tool or a metal ruler and insert it into the bezel.

    • Apply pressure and push down.

    • Do the same to the right side.

    • Once side of bezel facing you is decoupled, take the back cover and pry it loose.

  3. Remove the Power Button Circuit board Flat Flex Cable from the Power Supply board under the metal cage. Pull the cord back and out of the way. (It may be stuck down with adhesive)
    • Remove the Power Button Circuit board Flat Flex Cable from the Power Supply board under the metal cage.

    • Pull the cord back and out of the way.

    • (It may be stuck down with adhesive)

  4. Remove the Flat Flex Cables from the Power Button Circuit Board.
    • Remove the Flat Flex Cables from the Power Button Circuit Board.

Sonuç

To reassemble your device, follow these instructions in reverse order.

Christopher Kelly

Üyelik tarihi: 25-09-2014

590 İtibar

4 adet Kılavuz yazıldı

Takım

USF Tampa, Team 1-3, Brown Fall 2014 USF Tampa, Team 1-3, Brown Fall 2014 üyesi

USFT-BROWN-F14S1G3

3 Üyeler

5 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 0

Son 30 gün: 7

Her zaman: 547