Eşyalarını Tamir Et Topluluk Mağaza

Acer AL1916 Outer Case Replacement

Giriş

The outer casing protects the internals of the monitor.

Neye ihtiyacın var

  1. Acer AL1916 Outer Case Replacement, Stand: adım 1, 1 resimden 1.

    • Lay the monitor on a flat surface so that the back is facing up.

    Düzenle

  2. Acer AL1916 Outer Case Replacement: adım 2, 2 resimden 1. Acer AL1916 Outer Case Replacement: adım 2, 2 resimden 2.

    • Grab the hinge cover with both hands on either side of the stand.

    • Squeeze inwards with your thumbs and fingers and lift up to remove the hinge cover.

    Düzenle

  4. Acer AL1916 Outer Case Replacement: adım 3, 2 resimden 1. Acer AL1916 Outer Case Replacement: adım 3, 2 resimden 2.

    • Remove the four 12.1 mm Phillips #2 screws that hold the stand to the monitor.

    • Support the monitor while removing the screws to prevent the monitor from falling.

    • Lift up to detach the stand.

    Düzenle

  5. Acer AL1916 Outer Case Replacement, Outer Case: adım 4, 2 resimden 1. Acer AL1916 Outer Case Replacement, Outer Case: adım 4, 2 resimden 2.

    • Remove the five 9.5 mm Phillips #2 screws located around the perimeter of the monitor.

    Düzenle

  6. Acer AL1916 Outer Case Replacement: adım 5, 3 resimden 1. Acer AL1916 Outer Case Replacement: adım 5, 3 resimden 2. Acer AL1916 Outer Case Replacement: adım 5, 3 resimden 3.

    • Starting at the corner of the monitor, wedge the small plastic opening tool between the back cover and the display bezel.

    • Tilt the plastic opening tool up to separate the back cover from the display bezel.

    • Continue around the perimeter of the monitor until the display bezel comes off.

    • A reasonable amount of force is necessary to detach the back cover from the display bezel.

    Düzenle

  7. Acer AL1916 Outer Case Replacement: adım 6, 2 resimden 1. Acer AL1916 Outer Case Replacement: adım 6, 2 resimden 2.

    • Reposition the monitor so that the back is facing up.

    • Grab the corners of the monitor and jiggle them upwards to detach the back cover from the inside of the monitor.

    • Lift the back cover up.

    Düzenle
Sonuç

To reassemble your device, follow these instructions in reverse order.

Yazar

5 tane daha katılımcı ile

Keith

Üyelik tarihi: 10/06/11

336 İtibar

4 adet Kılavuz yazıldı

Rozetler: 13

+10 tane daha rozet

Ekip

Cal Poly, Team 20-26, Maness Fall 2011 Cal Poly, Team 20-26, Maness Fall 2011 üyesi

CPSU-MANESS-F11S20G26

4 Üyeler

14 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 1

Son 30 gün: 2

Her zaman: 1,230