Giriş

Use this guide to replace the LCD and faceplate of your Acer Aspire E1-470P-6659.

  1. Turn off the laptop and disconnect all device cords.
    • Turn off the laptop and disconnect all device cords.

  2. Flip the laptop over so the bottom is facing you.
    • Flip the laptop over so the bottom is facing you.

    • Insert the tip of the Plastic #3 Spudger into the battery release switch.

    • Press down and slide to the right and hold in that position.

    • Take your other hand to slide the battery away from the laptop to remove.

    • Locate the screws connected to the hinge of the laptop. Small, black stickers hide them from immediate view.

    • On both corners, use tweezers to remove small plastic sticker hiding the screws.

    • Remove screws using Phillips #0 screwdriver.

    • Turn the laptop over and open it up.

    • Using a prying tool, run along all edges of the display to pry the front face plate from the cover.

    • Use your fingers to pull the LCD panel and faceplate from the backing.

    • LCD with faceplate should separate, be careful not to pull completely away because there is a cable still attached to the display.

    • Carefully peel tape away from cable lead and separate cable from LCD panel.

    • Remove the LCD Panel and faceplate from the device.

Sonuç

To reassemble your device, follow these instructions in reverse order.

Joel Humes

Üyelik tarihi: 22-10-2018

121 İtibar

1 Kılavuz yazıldı

Takım

UC Davis, Team S4-G5, Lore Fall 2018 UC Davis, Team S4-G5, Lore Fall 2018 üyesi

UCD-LORE-F18S4G5

3 Üyeler

5 adet Kılavuz yazıldı

0 Yorum

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 Gün: 2

Son 30 Gün: 11

Her zaman: 35