Ana içeriğe geç

Giriş

If some or all of your keys are not working, you may need to place your laptop's keyboard. This guide will help you through this process.

  1. Make sure the laptop is powered off. Flip the laptop over and locate the battery release switch.
    • Make sure the laptop is powered off.

    • Flip the laptop over and locate the battery release switch.

    • Insert the pointed end of the spudger into the battery release switch.

    • Push the battery release switch to the right.

  2. While  the battery release switch is pushed to the right, carefully slide the battery out of its socket. While  the battery release switch is pushed to the right, carefully slide the battery out of its socket. While  the battery release switch is pushed to the right, carefully slide the battery out of its socket.
    • While the battery release switch is pushed to the right, carefully slide the battery out of its socket.

  3. Make sure laptop is upright. Pry the keyboard cover off with the plastic opening tool. Pry the keyboard cover off with the plastic opening tool.
    • Make sure laptop is upright.

    • Pry the keyboard cover off with the plastic opening tool.

  4. Flip the keyboard cover upside down. Use the JIS #000 screw bit to remove the marked M1.4 x 2 mm screws from the back of the metal panel. Use the JIS #000 screw bit to remove the marked M1.4 x 2 mm screws from the back of the metal panel.
    • Flip the keyboard cover upside down.

    • Use the JIS #000 screw bit to remove the marked M1.4 x 2 mm screws from the back of the metal panel.

  5. Push the metal panel forward to unlock it from plastic holders on both sides. Lift the metal panel up and peel it back to expose the keyboard component. Lift the metal panel up and peel it back to expose the keyboard component.
    • Push the metal panel forward to unlock it from plastic holders on both sides.

    • Lift the metal panel up and peel it back to expose the keyboard component.

  6. Use the metal spudger to lift the keyboard component out of the metal panel. Use the metal spudger to lift the keyboard component out of the metal panel. Use the metal spudger to lift the keyboard component out of the metal panel.
    • Use the metal spudger to lift the keyboard component out of the metal panel.

Sonuç

To reassemble your device, follow these instructions in reverse order.

Matthew Barboza

Üyelik tarihi: 19-10-2018

159 İtibar

1 Kılavuz yazıldı

Takım

UMass Dartmouth, Team S7-G7, Valliere Fall 2018 UMass Dartmouth, Team S7-G7, Valliere Fall 2018 üyesi

UMASSD-VALLIERE-F18S7G7

5 Üyeler

5 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 2

Son 30 gün: 9

Her zaman: 120