Ana içeriğe geç

Eşyalarını Tamir Et

Onarma Hakkı

Parçalar ve Aletler

Giriş

Hard drives store all your data, but they are slow and can fail. This guide will show you how to replace a broken or slow hard drive with a different hard drive or solid state drive.

  1. Ensure your device is OFF before beginning this procedure.
    • Ensure your device is OFF before beginning this procedure.

    • Unscrew the 5 mm Phillips head screw holding the drive in place.

  2. Pull out the disk drive.
    • Pull out the disk drive.

  3. Nintendo Switch Kit'leri

    Oyuna geri dönmek için hızlı bir düzeltme

    Switch Kit'leri Satın Al

    Nintendo Switch Kit'leri

    Oyuna geri dönmek için hızlı bir düzeltme

    Switch Kit'leri Satın Al
  4. Unscrew all 17 (5mm) Philips head screws from the bottom. Unscrew the 3 (2.5mm) Philips head screws underneath the optical drive.
    • Unscrew all 17 (5mm) Philips head screws from the bottom.

    • Unscrew the 3 (2.5mm) Philips head screws underneath the optical drive.

  5. Run a pick around the edge of the laptop (between the two parts) to open it. Lift the left side of the case up and unplug the speaker cable before fully taking the bottom off.
    • Run a pick around the edge of the laptop (between the two parts) to open it.

    • Lift the left side of the case up and unplug the speaker cable before fully taking the bottom off.

  6. Remove the hard drive by pulling it out to the left.
    • Remove the hard drive by pulling it out to the left.

Sonuç

To reassemble your device, follow these instructions in reverse order.

6 farklı kişi bu kılavuzu tamamladı.

Alex Bahm

Üyelik tarihi: 18-01-2018

1.789 İtibar

6 adet Kılavuz yazıldı

Takım

Cal Poly, Team S12-G5, Banghart Winter 2018 Cal Poly, Team S12-G5, Banghart Winter 2018 üyesi

CPSU-BANGHART-W18S12G5

2 Üyeler

15 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 2

Son 7 gün: 30

Son 30 gün: 113

Her zaman: 3,789