Ana içeriğe geç

Giriş

In this guide you will learn to remove your current Acer Aspire M5 fan and then you can repeat the steps in reverse to install a new one.

  1. Remove all 18 of the marked screws (2.12 mm) using a Phillips #1 Screwdriver.
    • Remove all 18 of the marked screws (2.12 mm) using a Phillips #1 Screwdriver.

  2. Use the spudger to slowly and gently work your away around the device, popping the bottom cover off the device. Use the spudger to slowly and gently work your away around the device, popping the bottom cover off the device.
    • Use the spudger to slowly and gently work your away around the device, popping the bottom cover off the device.

  3. MacBook Pil Tamir Setleri

    Başlangıç $69.99

    Buy Now

    MacBook Pil Tamir Setleri

    Başlangıç $69.99

    Buy Now
  4. Remove the four marked screws (2.31mm) using a Phillips #1 Screwdriver. Remove the four marked screws (2.31mm) using a Phillips #1 Screwdriver.
    • Remove the four marked screws (2.31mm) using a Phillips #1 Screwdriver.

  5. After the screws are removed, you will need to unplug it from the motherboard shown by the red rectangle. After it  is unplugged, then you will be able to remove the fan completely. After the screws are removed, you will need to unplug it from the motherboard shown by the red rectangle. After it  is unplugged, then you will be able to remove the fan completely.
    • After the screws are removed, you will need to unplug it from the motherboard shown by the red rectangle. After it is unplugged, then you will be able to remove the fan completely.

Sonuç

To reassemble your device, follow these instructions in reverse order.

2 farklı kişi bu kılavuzu tamamladı.

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 2

Son 7 Gün: 2

Son 30 Gün: 6

Her zaman: 85