Ana içeriğe geç

Giriş

The battery is a key component to giving the laptop power. Without the battery there will be no power for the laptop to function properly. This guide will show you how to remove and replace the battery.

  1. Remove the ten 7mm Phillips #0 screws from the bottom. Remove the ten 7mm Phillips #0 screws from the bottom.
    • Remove the ten 7mm Phillips #0 screws from the bottom.

  2. Insert a plastic opening tool under the bottom cover and slid it around the perimeter until all of the clips release. Insert a plastic opening tool under the bottom cover and slid it around the perimeter until all of the clips release.
    • Insert a plastic opening tool under the bottom cover and slid it around the perimeter until all of the clips release.

  3. Skip the upgrade.

    Take $10 off $50 with
    SKIPANDSAVE10

    Save Now

    Skip the upgrade.

    Take $10 off $50 with
    SKIPANDSAVE10

    Save Now
  4. Remove the two 5mm Phillips #0 screws from the battery. Remove the two 5mm Phillips #0 screws from the battery.
    • Remove the two 5mm Phillips #0 screws from the battery.

  5. Use a spudger to flip up the retaining flaps on the  ribbon cable ZIF sockets. Remove the ribbon cables from the sockets. Remove the ribbon cables from the sockets.
    • Use a spudger to flip up the retaining flaps on the ribbon cable ZIF sockets.

    • Remove the ribbon cables from the sockets.

  6. Disconnect the battery from the motherboard. Remove the battery. Remove the battery.
    • Disconnect the battery from the motherboard.

    • Remove the battery.

Sonuç

To reassemble your device, follow these instructions in reverse order.

Joseph

Üyelik tarihi: 25-01-2018

589 İtibar

6 adet Kılavuz yazıldı

Takım

USF Tampa, Team S20-G1, Passmore Spring 2018 USF Tampa, Team S20-G1, Passmore Spring 2018 üyesi

USFT-PASSMORE-S18S20G1

3 Üyeler

6 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 4

Son 7 Gün: 21

Son 30 Gün: 72

Her zaman: 664