Skip to main content

Giriş

The USB port allows you to connect other devices to the laptop. This guide will show you how to remove and replace the USB port.

Parçalar

Hiçbir parça belirtilmedi.

  1. Remove the ten 7mm Phillips #0 screws from the bottom. Remove the ten 7mm Phillips #0 screws from the bottom.
    • Remove the ten 7mm Phillips #0 screws from the bottom.

  2. Insert a plastic opening tool under the bottom cover and slid it around the perimeter until all of the clips release. Insert a plastic opening tool under the bottom cover and slid it around the perimeter until all of the clips release.
    • Insert a plastic opening tool under the bottom cover and slid it around the perimeter until all of the clips release.

  3. Android Tamir Setleri

    Yeni bir ekran veya pil, bir tamir kiti kadar yakınında.

    Hemen Alışveriş Yapın

    Android Tamir Setleri

    Yeni bir ekran veya pil, bir tamir kiti kadar yakınında.

    Hemen Alışveriş Yapın
  4. Use a spudger to flip up the retaining flap on the  ribbon cable ZIF socket. Remove the ribbon cable from the socket.
    • Use a spudger to flip up the retaining flap on the ribbon cable ZIF socket.

    • Remove the ribbon cable from the socket.

  5. Remove the 5mm Phillips #0 screw from the USB port. Remove the USB port from the device.
    • Remove the 5mm Phillips #0 screw from the USB port.

    • Remove the USB port from the device.

Sonuç

To reassemble your device, follow these instructions in reverse order.

Joseph

Üyelik tarihi: 25-01-2018

589 Reputation

6 adet Kılavuz yazıldı

Team

USF Tampa, Team S20-G1, Passmore Spring 2018 USF Tampa, Team S20-G1, Passmore Spring 2018 üyesi

USFT-PASSMORE-S18S20G1

3 Üyeler

6 adet Kılavuz yazıldı

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 2

Past 30 Days: 9

All Time: 162