Ana içeriğe geç
  1. Shut down the laptop and disconnect the power cord.
    • Shut down the laptop and disconnect the power cord.

    • Failing to disconnect or shut down the laptop could result in damage to the laptop or a shock hazard.

    • Turn the laptop over.

  2. Remove six 10 mm T7 screws. Remove four 6 mm T7 screws. Use the blue plastic opening tool to carefully remove the rubber pad which covers the two remaining screws.
    • Remove six 10 mm T7 screws.

    • Remove four 6 mm T7 screws.

    • Use the blue plastic opening tool to carefully remove the rubber pad which covers the two remaining screws.

    • Remove the remaining two 10 mm T7 screws.

  3. Carefully lift the cover upwards.
    • Carefully lift the cover upwards.

    • If the cover seems stuck, use a spudger tool to pry the sides.

Sonuç

To reassemble your device, follow these instructions in reverse order.

F Fernandez

Üyelik tarihi: 13-01-2015

420 İtibar

2 adet Kılavuz yazıldı

Takım

USF Tampa, Team 3-4, Hickman Winter 2015 USF Tampa, Team 3-4, Hickman Winter 2015 üyesi

USFT-HICKMAN-W15S3G4

4 Üyeler

7 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 0

Son 30 gün: 0

Her zaman: 92