Ana içeriğe geç

Parçalar

Hiçbir parça belirtilmedi.

  1. Place laptop upside down.
    • Place laptop upside down.

  2. Remove the twelve 5mm screws with a Phillips #1 screwdriver. Remove the twelve 5mm screws with a Phillips #1 screwdriver.
    • Remove the twelve 5mm screws with a Phillips #1 screwdriver.

  3. Lift cover upwards away from you.
    • Lift cover upwards away from you.

  4. Remove the four Phillips #0 screws that are connected to the left and right speakers. Carefully disconnect the wires that connect the speaker to the rest of the computer. Carefully disconnect the wires that connect the speaker to the rest of the computer.
    • Remove the four Phillips #0 screws that are connected to the left and right speakers.

    • Carefully disconnect the wires that connect the speaker to the rest of the computer.

  5. iPhone Pil Tamir Setleri

    Only $29.99

    Buy Now

    iPhone Pil Tamir Setleri

    Only $29.99

    Buy Now
  6. Remove two Phillips #0 screws that are beside the ends of the gray wire.
    • Remove two Phillips #0 screws that are beside the ends of the gray wire.

  7. Remove the gray wire slowly with tweezers. Carefully peel wire off. Carefully peel wire off.
    • Remove the gray wire slowly with tweezers.

    • Carefully peel wire off.

  8. Slowly remove the two wires that are to the left of the battery with tweezers in an upward pulling motion. Slowly remove the two wires that are to the left of the battery with tweezers in an upward pulling motion.
    • Slowly remove the two wires that are to the left of the battery with tweezers in an upward pulling motion.

  9. Completely remove the battery out of its position. Completely remove the battery out of its position.
    • Completely remove the battery out of its position.

  10. Remove the five Phillips #0 screws that are on the border of the laptop. Disconnect the white wire that is below the fan.
    • Remove the five Phillips #0 screws that are on the border of the laptop.

    • Disconnect the white wire that is below the fan.

  11. Flip all of the circuits upwards. Remove all Phillips #0 screws.
    • Flip all of the circuits upwards.

    • Remove all Phillips #0 screws.

    • Remove the keyboard.

Sonuç

To reassemble your device, follow these instructions in reverse order.

Brian Jimenez

Üyelik tarihi: 18-09-2018

145 İtibar

1 Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 Gün: 0

Son 30 Gün: 5

Her zaman: 80